Matte Black Mobile Phone Stand

A matte black mobile phone stand with an ergonomic adjustable design and non-slip base.

Ergonomic design; non-slip base; adjustable up to 90 degrees; adjustable height from 7.5" to 10.5" (19 to 26.5 cm).

Color

Matte Black · black

Material

Metal, ABS plastic, and silicone

Secondary

metal, abs-plastic

Gender

unisex

Age Group

adult

Condition

new

Dimensions

12.4 x 9.8 x 19 cm

Category

Electronics > Electronics Accessories > Mobile Phone & Tablet Tripods & Monopods

01

Product

A matte-black upright mobile phone stand with a round low-profile base, a straight cylindrical stem, and a small U-shaped cradle holding a phone; a phone is present and partially obscures the cradle and upper stem.

• Base shapeCircular, flat low-profile base with a slightly raised rim and a short tapered neck where the stem meets the base.
  1 region

  x 0.27 · y 0.78 · w 0.46 · h 0.16 (high)
• Stem geometryVertical straight cylindrical stem rising from the base; consistent diameter along its visible length and a smooth matte finish.
  1 region

  x 0.46 · y 0.34 · w 0.08 · h 0.46 (high)
• Cradle formSmall U-shaped cradle formed by two rounded hooks that support the phone at its bottom edge; cradle attaches to a short horizontal pivot arm.
  1 region

  x 0.40 · y 0.26 · w 0.22 · h 0.18 (high)
• Pivot connectionShort horizontal cylindrical pivot arm connecting the cradle to the stem, visible as a rounded joint behind the phone.
  1 region

  x 0.36 · y 0.28 · w 0.12 · h 0.10 (medium)
• Finish and surfaceUniform dark matte finish across base, stem, pivot and cradle with slight specular highlights visible on rounded edges.
• Occlusion by phoneA phone placed upright in the cradle obscures the front face of the cradle and the near side of the pivot joint.
  1 region

  x 0.34 · y 0.08 · w 0.32 · h 0.46 (high)

Other

Studio-style product photo on a tiled surface and tiled wall, neutral warm lighting from top-left creating soft shadows; phone used as prop.

• Background and surfaceBeige square tiles on both the vertical background and horizontal surface forming a tiled backdrop and tabletop.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Lighting and shadowWarm, directional lighting from the upper-left producing a soft shadow to the lower-right of the stand and a subtle highlight on curved edges.
• Prop presentA smartphone with a light-colored case is placed in the cradle and is not part of the product being described; it visually occludes part of the stand.
  1 region

  x 0.34 · y 0.06 · w 0.32 · h 0.50 (high)
• Shot compositionThree-quarter view showing the stand centered in frame, photographed at roughly tabletop eye level with vertical orientation.

Colors

matte black· basematte black· stemmatte black· cradle and pivot

02

Product

Matte black metal phone stand with a rounded rectangular rear support plate, curved lower cradle lips, a vertical cylindrical post, a spherical hinge joint with a visible fastener, and a low circular base with raised rim. Finish appears matte with small glossy metal fastener.

• Back support plateSingle rounded-rectangle flat plate that forms the main support surface; plate edges are slightly chamfered and plate is aligned vertically behind the cradle lips.
  1 region

  x 0.28 · y 0.06 · w 0.44 · h 0.49 (high)
• Lower cradle lipsPair of curled inward lips at the bottom front edge of the support plate that form the phone rest; lips are rounded and open toward the viewer.
  2 regions

  x 0.22 · y 0.40 · w 0.30 · h 0.16 (high); x 0.48 · y 0.40 · w 0.20 · h 0.16 (high)
• Spherical hinge jointGlossy near-spherical joint connecting the back plate to the vertical post, with a visible circular metal screw head on the left side of the joint.
  1 region

  x 0.45 · y 0.22 · w 0.18 · h 0.13 (high)
• Visible screw headSmall round silver screw head inset in the hinge housing and clearly reflective.
  1 region

  x 0.40 · y 0.24 · w 0.04 · h 0.05 (high)
• Vertical postCylindrical vertical post with a matte finish connecting the hinge to the base; post shows a narrow seam or collar detail near the hinge.
  1 region

  x 0.46 · y 0.28 · w 0.12 · h 0.51 (high)
• Circular baseLow-profile circular base with a slightly raised outer rim and central tapered neck where the post meets the base.
  1 region

  x 0.25 · y 0.72 · w 0.50 · h 0.22 (high)
• Surface finishOverall matte black finish on plate, post, and base; hinge sphere shows more specular reflection than other parts.

Other

Product photographed on a pale beige tiled surface with a tiled wall background. Soft directional lighting from the left casts gentle shadow to the right of the base; image is vertically framed and centered on the stand.

• Background tilesBeige square tiles on both the horizontal surface and the vertical backdrop, forming a grid pattern.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Surface reflection and shadowSoft shadow cast to the right of the base on the tiled surface and subtle highlight along the left edge of the hinge and post from directional lighting.
  1 region

  x 0.54 · y 0.80 · w 0.30 · h 0.18 (medium)
• Shot compositionCentered vertical composition showing the stand in near-full height from base to top of the support plate, photographed slightly from below eye level.

Colors

matte black· support platematte black· cradle lipsmatte black· vertical post and basemetallic silver· hinge screw

03

Product

A line-drawn depiction of a vertical mobile phone stand is printed on the front and side faces of the box; the printed drawing shows a rectangular phone rest with a stem and T-shaped base.

• Printed front illustrationSingle-line brown-gray illustration of a vertical phone stand centered on the front face showing a rectangular phone rest with diagonal hatch shading, a short neck, and a T-shaped base.
  1 region

  x 0.46 · y 0.34 · w 0.22 · h 0.28 (high)
• Printed side illustrationOutline drawing on the visible left side of the box showing the same phone rest atop a taller stem and a rounded rectangular base, rendered as a single-line sketch.
  1 region

  x 0.09 · y 0.25 · w 0.24 · h 0.54 (high)

Packaging

Rectangular upright retail box with brand name and bilingual product name printed on the front; size statement printed along the bottom edge.

• Brand wordmark“MAISON printed in uppercase centered near the top of the front face with a smaller 'simons' logo directly above it.”
  1 region

  x 0.40 · y 0.11 · w 0.30 · h 0.12 (high)
• Bilingual product name“Support à téléphone”
  1 region

  x 0.42 · y 0.42 · w 0.28 · h 0.07 (high)
• Bilingual product name English“Phone stand”
  1 region

  x 0.42 · y 0.49 · w 0.28 · h 0.07 (high)
• Size line“Taille — Size”
  1 region

  x 0.28 · y 0.82 · w 0.44 · h 0.06 (high)
• Size dimensions“9,8 x 19 x 12,4 cm — 3.8" x 7.4" x 4.8"”
  1 region

  x 0.28 · y 0.88 · w 0.44 · h 0.06 (high)
• Color label“NOIR / BLACK”
  1 region

  x 0.14 · y 0.31 · w 0.12 · h 0.04 (medium)

Other

Studio shot of the upright product box placed on a tiled surface with even soft lighting and a visible soft shadow on the right; beige square tiles form the background and surface.

• Shot compositionBox is photographed upright and slightly turned to show front and left side faces; camera framing includes the full box with small margins.
• Background and surfaceBeige square ceramic tiles on both the vertical background and horizontal surface, grid grout lines visible.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Lighting and shadowSoft, diffused lighting with a mild shadow cast to the right of the box onto the tiled surface.
  1 region

  x 0.56 · y 0.76 · w 0.30 · h 0.18 (medium)

Colors

warm off-white· box front and sidesPackagingmuted brown-gray· printed text and line drawingsPackaging