Simons Maison
Cement Tower Candleholder
The Cement Tower Candleholder is a sculptural pedestal designed to hold pillar candles. It features textured cement with a travertine-like appearance and foam pads on the bottom to protect surfaces. Measuring 3.5 inches (9 cm) in diameter and 8 inches (20 cm) tall, it accommodates pillar candles in its top cup.
- Material
- Textured cement with travertine look
- Category
- Home & Garden > Decor > Home Fragrance Accessories > Candle Holders
Specifications
Sculptural cement candleholder with a travertine texture, designed to hold pillar candles.
Textured cement with travertine look; foam pads on bottom protect surfaces; holds pillar candles.
- Material
- Textured cement with travertine look
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Dimensions
- 3.5 x 3.5 x 8 in
- Category
- Home & Garden > Decor > Home Fragrance Accessories > Candle Holders
Additional Attributes
- sleek
- sculptural
- raw natural texture
- travertine look
- foam pads on bottom
- holds pillar candles
Product Insights
This matte cement candleholder from Simons Maison, priced at 18 CAD and in stock, offers a raw, unique finish with visible pits and tonal variations. It fits 2-inch and 3-inch pillar candles. The core tradeoff: its unsealed porosity readily absorbs melted wax, so sealing is recommended to prevent stains, while unsealed use requires careful wax removal with heat and a plastic scraper. Though best used indoors, outdoor use is possible with sealing to prevent moisture damage.
Verified claims
- Stain prevention
- Sealing prevents wax stains; unsealed cement readily absorbs melted wax.
- Wax removal
- Remove hardened wax with plastic scraper; blot residue with heat and paper towels.
- Use location
- Best used indoors; outdoor use requires sealing to prevent moisture damage.
- Fit
- The 3.5-inch (9 cm) top cup fits pillar candles up to about 3 inches across; standard 2-inch and 3-inch pillar candles work well, and the holder stands 8 inches (20 cm) tall.
- Finish
- Sculptural cement with a matte, raw, natural travertine-like finish that shows visible variations in tone and texture.
- Indoor use
- The foam pads on the bottom protect indoor surfaces but may degrade outdoors; unsealed cement can also be damaged by outdoor moisture.
- Shipping durability
- One buyer reports the holder arrived broken because it was poorly wrapped for shipping; customer service later issued a refund.
- Stable base for 3-inch pillar candles
- Solid cement gives the tower a low, bottom-weighted center of gravity, so a 3-inch pillar candle sits securely even though the column is only 3.5 inches (9 cm) across and has no wide, flared foot.
- Heat safety
- The cement body stays cool to the touch during a normal burn because cement conducts heat slowly and the flame sits at the top; placing the holder on a coaster or heat-safe tray is still a sensible precaution on finished wood or fabric.
Product record
- Title
- Cement Tower Candleholder
- Brand
- Simons Maison
- Price
- 18 CAD
- Availability
- In stock
Buying Guide
1 comparison · 10 sourcesUses
Displaying pillar candles as a sculptural accent
Use this cement tower candleholder to hold a pillar candle as part of a tabletop or shelf display. Its tapered tower shape and raw, natural cement texture are designed to hold pillar candles with style, and the product images show it paired with another holder of a different height, each seating a white pillar candle.[1,2]
Displaying candles without marking your surfaces
This cement candleholder comes with foam pads on the bottom that are designed to protect the surface it sits on, so you can place it on a coffee table, shelf, or mantel while burning a candle.[1]
Product comparison
Compared within this brand.
| Cement Tower Candleholder: Choose this if you want a sculptural cement pillar-candle holder with a raw, travertine-look texture: it is shaped like a tower with a short recessed cup on a tapered base, finished in a matte Sand tone, and measures about 3.5 inches (9 cm) in diameter by 8 inches (20 cm) tall, with foam pads on the bottom intended to protect surfaces. It is sold in one size, and if you display several together, note that the beige tone can vary slightly between pieces.[1,2,3,4] | Small Glossy Ceramic Candle Holder: Choose this if you want a small, modern accent piece in glossy cream-beige ceramic with a subtle speckled finish and an arched loop handle. It has a 1 inch (2.5 cm) opening meant for spindle candles and measures 3 inches (7.5 cm) in diameter by 2.25 inches (6 cm) tall. Note that a candle is shown in the product photos but its inclusion is not established, so plan to supply your own taper.[5,6,7] | Elongated Shiny Ceramic Candle Holder: Choose this if you want an artisanal-inspired, shiny ceramic holder with a speckled olive-green body (Khaki/Sage/Olive variant) and a small decorative loop handle. Its 1 inch (2.5 cm) opening is designed for spindle candles, so check your candle style before buying. Standing 5.5 inches (14 cm) tall and 2.25 inches (5.5 cm) in diameter, it suits a natural-toned, high-gloss accent for tabletops or shelves.[8,9,10] |
Image Analysis
3 images- 01
Product
A single cylindrical white pillar candle seated in a textured beige stone or cement pedestal composed of a short cylindrical cup on top of a tapered conical base; both candle and holder are centered and shown from the front.
- Pillar candleSmooth cylindrical white pillar candle with a centered visible wick at the top and a slightly rounded top surface; candle sits flush inside the holder's cup.
1 region
x 0.40 · y 0.08 · w 0.20 · h 0.46 (high) - Top wickShort white wick centered on the candle top, upright and unburned.
1 region
x 0.49 · y 0.06 · w 0.02 · h 0.03 (high) - Holder cupShort cylindrical cup forming the top of the holder with a hollowed center where the candle is seated; surface is textured with small pits and irregularities.
1 region
x 0.36 · y 0.44 · w 0.28 · h 0.14 (high) - Tapered baseConical tapered base widening slightly at the bottom, continuous material from the cup down; surface shows pitted texture and variation in tone throughout.
1 region
x 0.34 · y 0.58 · w 0.32 · h 0.34 (high) - Surface textureBeige stone or cement texture on the holder with visible small pits, pores, and subtle darker flecks and patches.
1 region
x 0.34 · y 0.44 · w 0.32 · h 0.48 (high)
Other
Studio shot with draped neutral beige fabric background and soft directional lighting from upper left creating gentle shadows to the right and below the product.
- Background fabricDraped beige or cream fabric forms the backdrop and supporting surface with visible folds and soft texture.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Lighting and shadowSoft directional light from the upper left produces highlights on the candle and holder and casts soft shadows to the lower right of the base.
- Shot compositionProduct is centered in frame, photographed from a slightly elevated frontal angle showing the top of the candle and full height of the holder.
Colors
warm beige cement· holder#B4947Bpure white· candle#F7F1F1- Pillar candleSmooth cylindrical white pillar candle with a centered visible wick at the top and a slightly rounded top surface; candle sits flush inside the holder's cup.
- 02
Product
Close-up of a single cylindrical cement candleholder showing a shallow recessed top cup and a tapering conical base with a textured, pitted surface.
- Top cup geometryShallow circular recessed cup at the top with a rounded inner lip and a flat bottom visible inside the cup.
1 region
x 0.15 · y 0.06 · w 0.70 · h 0.24 (high) - Rim and edgeThick rounded outer rim around the cup with a slightly beveled top edge.
1 region
x 0.15 · y 0.06 · w 0.70 · h 0.14 (high) - Base shapeTapering conical pedestal base that narrows toward the visible lower edge of the frame.
1 region
x 0.24 · y 0.28 · w 0.52 · h 0.62 (high) - Surface textureRough, pitted cement texture with visible small voids and irregularities across both the cup and base surfaces.
1 region
x 0.15 · y 0.06 · w 0.70 · h 0.84 (high) - Material appearanceMatte stonelike appearance consistent with cast cement, showing subtle tonal variations and tiny darker inclusions.
1 region
x 0.15 · y 0.06 · w 0.70 · h 0.84 (high) - Top interior shadowSoft shadow across the inner bottom of the cup indicating directional lighting toward the right side of the image.
1 region
x 0.27 · y 0.12 · w 0.46 · h 0.12 (high)
Other
The product is photographed against a soft, draped fabric background with warm, directional lighting from the right producing soft shadows and highlights.
- Background fabricSoft draped light fabric behind and beneath the product, visible folds and gentle texture.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (medium) - Lighting directionWarm directional light from the right producing a highlight on the right rim and a shadow cast to the left inside the cup and down the left side of the base.
- Shot compositionClose-up vertical composition centered on the top two thirds of the candleholder, lower portion of the base extending toward the bottom edge of the frame.
Colors
warm beige cement· main body#DBBC9C- Top cup geometryShallow circular recessed cup at the top with a rounded inner lip and a flat bottom visible inside the cup.
- 03
Product
Two tapered cement tower candleholders with cylindrical shallow cup tops each holding an unlit white pillar candle; surfaces show pitted, slightly rough cement texture and an aged beige tone.
- Left holder geometryTall tapered conical base rising to a short cylindrical cup top with a flat upper rim that holds a pillar candle; overall silhouette is vertical and balanced.
1 region
x 0.12 · y 0.18 · w 0.34 · h 0.66 (high) - Right holder geometryShorter tapered cylindrical base with proportionally wider short cylindrical cup top that holds a pillar candle; shape mirrors the left piece at a smaller scale.
1 region
x 0.54 · y 0.26 · w 0.27 · h 0.56 (high) - Cement surface textureMatte, slightly porous cement finish with small pits, air bubbles, and irregular flecking visible across both holders; tone varies slightly between pieces.
1 region
x 0.12 · y 0.18 · w 0.69 · h 0.66 (high) - Left pillar candleTall white cylindrical pillar candle with a centered wick and smooth glossy finish seated in the left holder's cup.
1 region
x 0.27 · y 0.02 · w 0.20 · h 0.30 (high) - Right pillar candleShorter white cylindrical pillar candle with a centered wick and smooth glossy finish seated in the right holder's cup.
1 region
x 0.62 · y 0.06 · w 0.17 · h 0.28 (high)
Other
Staged studio shot on a draped neutral beige fabric with soft directional lighting from the right creating diagonal shadows; no visible packaging or text.
- Background and surfaceBeige fabric backdrop and draped cloth surface with visible folds and soft texture covering entire frame behind and under the holders.
- Lighting and shadowsSoft directional light from the right produces gentle diagonal highlights and shadows across the backdrop and cast shadows to the left of the holders.
- Shot compositionFrontal three-quarter view showing both holders at slightly different depths; left holder is positioned closer to camera and appears taller.
Colors
warm beige cement· cement holders#DCC2ABaged beige-brown· darker aged areas on cement#D2AE8Bbright white· pillar candles#F7F1F2- Left holder geometryTall tapered conical base rising to a short cylindrical cup top with a flat upper rim that holds a pillar candle; overall silhouette is vertical and balanced.
Documents & Data
Customer Reviews
1 total1 reviews · out of 5
Great candleholder- but arrived broken
This was so unfortunate. Usually Simons shipping dept does an excellent job, but this was poorly wrapped and broke during shipping. Took customer service a while to get back to me but a refund was isduef