Small marbled candle holder product image (primary)
A small two-part marbled candle holder (upright cup-style holder on a shallow round dish) holding a tall lit tapered candle with visible wax drips.

Simons Maison

Small Marbled Candle Holder

CA$15.00CAD
In Stock

This small marbled ceramic candle holder is a two-part accessory with a cup-style candle seat on a shallow round dish, designed to hold one spindle or tapered candle. It has a glossy and matte marbled finish, a 2.5 cm (1 in) opening for spindle candles, a height of 7.5 cm (3 in), and a diameter of 9 cm (3.5 in). The holder is intended for tabletop use with standard tapered candles.

Color
natural tones
Material
Ceramic
Style
artisan
Category
Home & Garden > Decor

Specifications

A small artisan-inspired marbled ceramic candle holder in natural tones with a glossy and matte finish, designed for spindle candles.

Ceramic construction with a glossy and matte finish; 1" (2.5 cm) opening for spindle candles; height 7.5 cm (3"); diameter 9 cm (3.5").

Color
natural tones · brown
Material
Ceramic
Style
artisan
Age Group
adult
Condition
new
Dimensions
9x9x7.5 cm
Category
Home & Garden > Decor

Additional Attributes

  • artisan-inspired
  • natural tones
  • marbled
  • ceramic
  • glossy and matte finish
  • 1" (2.5 cm) opening for spindle candles
  • Height: 7.5 cm (3")
  • Diameter: 9 cm (3.5")

Product Insights

Ceramic construction. 1 in (2.5 cm) opening for spindle candles. Two-part cup-and-dish form. Stop burning with about 1/2 in of wax left. Artisan-inspired natural-tone accent. Affordable decorative ceramic at 15 CAD.

Verified claims

material
Ceramic construction.
finish
Glossy and matte ceramic finish.
color
Patterned Brown marbled color.
size
One size: 7.5 cm high by 9 cm diameter.
fit
1 in (2.5 cm) opening for spindle candles.
compatibility
Compatible with standard taper and dinner candles.
construction
Two-part cup-and-dish form.
stability
Check stability before lighting.
burn safety
Stop burning with about 1/2 in of wax left.
heat resistance
Direct flame heat can crack ceramic.
condition
Use only fully glazed, uncracked ceramic.
installation
Do not force an oversize candle into the cup.
installation
Secure a loose taper with dripped wax.
use care
Do not move while wax is liquid.
maintenance
Extinguish and trim if the candle sputters, smokes, or flickers.
styling
Artisan-inspired natural-tone accent.
use
Best for taper or spindle candles.
comparison
Ceramic compares well with other non-combustible holder materials.
value
Affordable decorative ceramic at 15 CAD.
care
Inspect for cracks, thin spots, or an uneven finish before candle use.
wax drip
Shallow dish can catch minor wax drips.

Product record

Title
Small Marbled Candle Holder
Brand
Simons Maison
Price
15 CAD
Availability
In stock

Buying Guide

1 comparison · 7 sources

Uses

Holding a spindle candle for ambient lighting

This small marbled holder has a 1-inch (2.5 cm) opening designed for spindle candles, with an upright cup on a shallow round dish to catch drips as the candle burns. It suits lighting a single tall tapered candle as part of a table or room display.[1,2]

Product comparison

Compared within this brand.

Why and when to choose each product
This product

Small Marbled Candle Holder

Simons Maison

simons.ca

Same brand

Small Glossy Ceramic Candle Holder

Simons Maison

simons.ca

Same brand

Fluted Glass Reversible Candle Holder

Simons Maison

simons.ca

Small Marbled Candle Holder: Choose this if you want a small, artisan-inspired candle holder in natural tones, described by the retailer as meticulously marbled, with a ceramic body finished in glossy and matte glazing; image analysis shows a dark brown base with irregular metallic copper/gold mottling and occasional small blue-green flecks. It has a 1 inch (2.5 cm) opening intended for spindle candles and a compact footprint of 7.5 cm (3 inches) tall by 9 cm (3.5 inches) in diameter, in a two-part cup-on-dish form. Note that the glaze shows slight surface texture where it pools and thins, so expect some handmade-style variation.[1,2,3]Small Glossy Ceramic Candle Holder: Choose this if you want a modern, miniature ceramic candle holder for spindle (taper) candles: it has a 1 inch (2.5 cm) opening, a glossy speckled glaze in Ivory/Cream Beige, and a compact form (3 inches / 7.5 cm diameter, 2.25 inches / 6 cm high) with an arched loop handle and round flat base. Note it comes in a single ONE SIZE variant, so it suits small-format displays rather than standard larger candles.[4,5]Fluted Glass Reversible Candle Holder: Choose this if you want one compact holder that switches between tea lights and taper candles, thanks to a reversible design with a 1-inch (2.5 cm) spindle opening and a 2-inch (5 cm) opening for votives and tealights. Its thick, tinted fluted glass in rich muted hues — offered in Mossy Green, Lilacs, Amber, or Assorted — gives a retro mid-century look, casts a warm diffused glow, and reviewers note its dense, heavy build feels stable. Note that its top opening runs wide for many standard slim taper candles, which can lean or tip unless shimmed, so check your candle fit.[6,7]

Image Analysis

2 images
Small marbled candle holder product image (primary)
01

Product

A small two-part marbled candle holder (upright cup-style holder on a shallow round dish) holding a tall lit tapered candle with visible wax drips.

  • Holder shapeTwo-piece single object composed of a short cylindrical cup that narrows slightly toward the base mounted on a shallow round saucer-like dish; cup and dish appear joined and share the same finish.
    1 regionx 0.40 · y 0.61 · w 0.20 · h 0.22 (high)
  • Holder finishGlossy dark brown marbled glaze with lighter amber-brown and reddish-brown irregular mottling and small reflective highlights.
    1 regionx 0.40 · y 0.61 · w 0.20 · h 0.22 (high)
  • Candle geometryTall, straight, cylindrical tapered pillar candle inserted into the cup; visible length extends well above the holder with a flame at the top.
    1 regionx 0.46 · y 0.05 · w 0.10 · h 0.65 (high)
  • Candle surface detailPale cream-colored wax with vertical melted wax drips and slight irregularities along the sides near the top where wax has run.
    1 regionx 0.46 · y 0.05 · w 0.10 · h 0.40 (high)
  • FlameSmall teardrop-shaped flame at the top of the candle with a visible dark wick and a small pool of melted wax immediately below the flame.
    1 regionx 0.49 · y 0.01 · w 0.04 · h 0.06 (high)

Other

Scene shows the candle holder placed on stacked books with a torn or folded printed paper sheet beneath it; neutral textured wall background, warm directional lighting from upper left creating soft shadows.

  • Supporting surface and propsStacked hardcover books with a single loose sheet of printed text laid between the top book and the holder; top book is dark with visible gold-styled script on the spine.
    1 regionx 0.10 · y 0.78 · w 0.80 · h 0.20 (high)
  • BackgroundPlain neutral beige-gray textured wall occupying the right and upper background of the image.
    1 regionx 0.40 · y 0.00 · w 0.60 · h 0.60 (high)
  • Lighting and shadowWarm directional light from the upper left producing soft shadow to the right of the holder and warm tonal highlights on the holder glaze and candle.
  • Image crop and compositionVertical portrait crop centered on the candle; top of the flame is near the upper edge and the base of the holder sits above the bottom edge, leaving parts of the stacked books visible.

Colors

marbled dark brown· holder (cup and dish)pale cream· candle
Small marbled candle holder product image 2
02

Product

A small two-part ceramic candle holder with a short central stem connecting a cup-like upper holder to a shallow round dish base; dark brown glossy glaze with irregular metallic copper/gold and small blue mottled patches.

  • Overall shapeTwo-part ceramic piece: a tapered cylindrical upper cup mounted on a short narrowed stem that rises from the center of a shallow round dish.
    1 regionx 0.33 · y 0.20 · w 0.34 · h 0.56 (high)
  • Material and finishGlazed ceramic with a glossy finish showing reflected highlights and slight surface texture where glaze pools and thins.
    1 regionx 0.33 · y 0.20 · w 0.34 · h 0.56 (high)
  • Surface patternIrregular marbled patches of metallic copper/gold tones over a dark brown background, with occasional small blue-green flecks.
    2 regionsx 0.34 · y 0.22 · w 0.32 · h 0.38 (high); x 0.36 · y 0.52 · w 0.28 · h 0.18 (high)
  • Upper cup interiorTop rim of the upper cup shows a glazed inner surface visible as a slightly lighter glossy ring at the top opening.
    1 regionx 0.44 · y 0.21 · w 0.12 · h 0.08 (medium)
  • Joint between cup and dishNarrow stem connects upper cup to dish; the stem area shows continuation of the same glaze pattern and a subtle recessed join where the stem meets the dish.
    1 regionx 0.42 · y 0.40 · w 0.16 · h 0.15 (high)

Other

Product is photographed centered on the spine of a textured cloth-bound book against a neutral warm background with soft directional lighting from the left producing gentle shadowing to the right.

  • Supporting surfaceProduct sits on the textured spine/top edge of a closed book with visible cloth texture and printed text on the spine.
    1 regionx 0.05 · y 0.78 · w 0.90 · h 0.18 (high)
  • Visible book text fragment“Got Something”
    1 regionx 0.06 · y 0.84 · w 0.48 · h 0.10 (high)
  • Visible book author fragment“ROBIN ROBE”Partial
    1 regionx 0.52 · y 0.84 · w 0.40 · h 0.10 (medium)
  • Background and lightingNeutral warm-toned plain backdrop with soft, even lighting from the left creating a subtle shadow to the right of the product.
  • ShadowSoft shadow cast to the right and slightly behind the object on the book surface.
    1 regionx 0.55 · y 0.58 · w 0.28 · h 0.22 (medium)

Colors

dark glossy brown· main glaze backgroundmetallic copper· marbled patchesmuted teal-blue· small accent fleckswarm golden brown· upper cup inner rim

Provenance

Merchant Link
https://www.simons.ca/en/decor/candles-ambient-lighting/small-marbled-candle-holder--22798-1271000
Updated