Danube Two-Way Wall Sconce Indoor And Outdoor

Minimalist wall sconce with dual-direction LED lighting, suitable for indoor and outdoor use.

Weather-resistant powder-coated cast aluminum construction; 7W LED modules (one upward and one downward); Installation guide included; Commercial grade; Designed and made in Quebec.

Material

weather-resistant powder-coated cast aluminum

Style

modern, minimalist, contemporary

Gender

unisex

Age Group

adult

Condition

new

Dimensions

14x6.5x4 in

Category

Home & Garden > Lighting > Lighting Fixtures > Wall Light Fixtures

01

Product

A vertically mounted cylindrical wall sconce with a matte medium-gray curved outer tube held by two narrow vertical brass-colored side rails; the fixture emits focused up-and-down warm white light and shows water droplets on its exterior.

• Overall shapeVertically oriented hollow cylinder mounted flush to the wall, with both top and bottom open allowing light to emit upward and downward.
  1 region

  x 0.43 · y 0.25 · w 0.13 · h 0.44 (high)
• Side railsTwo narrow vertical metal rails on the left and right edges of the cylinder running nearly its full height and projecting slightly forward from the cylinder face.
  2 regions

  x 0.42 · y 0.26 · w 0.02 · h 0.40 (high); x 0.55 · y 0.26 · w 0.02 · h 0.40 (high)
• Finish detailCurved cylinder surface appears matte with scattered visible water droplets and a slightly textured appearance from close lighting.
  1 region

  x 0.44 · y 0.29 · w 0.12 · h 0.36 (high)
• Light emissionWarm white conical light projected upward onto the wall above the fixture and a matching downward pool of light below the fixture.
  2 regions

  x 0.42 · y 0.06 · w 0.20 · h 0.20 (medium); x 0.42 · y 0.60 · w 0.20 · h 0.20 (medium)
• Top and bottom openingsTop rim of the cylinder is open and visible; bottom opening shows inner light source and a thin inner rim.
  2 regions

  x 0.44 · y 0.26 · w 0.12 · h 0.06 (high); x 0.44 · y 0.61 · w 0.12 · h 0.08 (high)

Other

Lifestyle exterior scene showing the sconce mounted on a textured wall beside a rain-covered window at dusk; foreground shrubbery and falling rain are visible, with soft directional lighting and reflections on the window.

• Scene contextFixture mounted on an exterior stucco-textured wall next to a multi-pane window with visible raindrops on the glass and streaking rain across the scene.
  1 region

  x 0.62 · y 0.05 · w 0.36 · h 0.90 (high)
• Foreground plantGreen leafy shrub occupies the lower-left foreground partially occluding the lower portion of the wall and casting soft shadow from the sconce light.
  1 region

  x 0.02 · y 0.68 · w 0.40 · h 0.30 (high)
• Weather and lightingVisible falling rain streaks and water droplets on the sconce and window indicate wet conditions; overall warm evening light with directional highlights and soft shadows.
• Image qualityHigh-resolution photographic lifestyle image with naturalistic lighting and slight vignette; no legible printed text present on product or packaging.

Colors

matte medium gray· curved cylinder bodymuted brass gold· side rails and mounting accents#A28D74

02

Product

A vertically mounted cylindrical wall sconce with a curved front panel attached to a narrow rectangular backplate via four small gold standoff pins; the fixture has open top and bottom for two-way light.

• Curved front cylinderTall, vertically oriented cylindrical front panel with a continuous curved face and an exposed lower rim opening.
  1 region

  x 0.33 · y 0.10 · w 0.34 · h 0.78 (high)
• Backplate and side flangesNarrow rectangular backplate with two parallel vertical side flanges that run the full height of the fixture and sit slightly recessed behind the curved front.
  1 region

  x 0.27 · y 0.08 · w 0.46 · h 0.84 (medium)
• Gold standoff pinsFour small cylindrical gold-colored pins visible in two horizontal pairs (one pair near the top, one pair near the bottom) that appear to secure the front to the side flanges.
  4 regions

  x 0.39 · y 0.17 · w 0.03 · h 0.03 (high); x 0.58 · y 0.17 · w 0.03 · h 0.03 (high); x 0.39 · y 0.62 · w 0.03 · h 0.03 (high); x 0.58 · y 0.62 · w 0.03 · h 0.03 (high)
• Top and bottom openingsVisible gap at the bottom rim and a matching open top edge indicating light will emit upward and downward.
  2 regions

  x 0.33 · y 0.08 · w 0.34 · h 0.08 (medium); x 0.33 · y 0.80 · w 0.34 · h 0.08 (medium)
• Surface finishMatte textured finish on the metal surfaces with a subtle granular texture visible across the curved face.
  1 region

  x 0.33 · y 0.10 · w 0.34 · h 0.78 (high)
• No visible printed text or logoNo legible brand name, model text, labels, or other printed text visible on the fixture surface in this image.

Other

Studio-style product photograph on a plain white background, centered framing, soft even lighting with faint shadowing beneath the fixture.

• Shot compositionFixture is vertically centered in the image with generous white space around; straight-on front-facing camera perspective.
• BackgroundUniform plain white background with no props or texture.
• Lighting and shadowSoft, even lighting with subtle shading on the curved face and a faint shadow visible beneath the fixture consistent with studio illumination.

Colors

warm taupe· curved front and backplateaged brass· standoff pins#9A8A7A