
Louis Poulsen
Aj Angular Light Fixture
The AJ Angular Light Fixture is a wall-mounted Louis Poulsen sconce designed in Denmark for directional task and accent lighting, featuring an articulated conical head that aims light precisely where needed. It measures 18 cm (7 in) high by 14.5 cm (5.75 in) wide and includes a built-in LED light, a power switch on the wall mount, and a power outlet connection. An installation guide is included and installation by a certified electrician is strongly recommended; brass surfaces are untreated and will develop a patina over time.
- Material
- Untreated brass surfaces
- Style
- modern, minimalist
- Category
- Home & Garden > Lighting > Lighting Fixtures > Wall Light Fixtures
Size
Specifications
Minimalist conical wall light with an articulated angular head and built-in LED, designed in Denmark.
Articulated head; power switch on wall mount; built-in LED light; power outlet connection; installation guide included; untreated brass surfaces will develop a patina over time.
- Material
- Untreated brass surfaces
- Style
- modern, minimalist
- Condition
- new
- Category
- Home & Garden > Lighting > Lighting Fixtures > Wall Light Fixtures
Additional Attributes
- Angular head directs light
- Articulated head
- Power switch on wall mount
- Built-in LED light
- Power outlet connection
- Installation guide included
- Certified electrician installation strongly recommended
- Untreated brass surfaces develop a patina over time
- Designed in Denmark
- Minimalist conical design
- Height: 18 cm (7 in)
- Width: 14.5 cm (5.75 in)
Product Insights
Angular adjustable wall sconce with a conical shade Replaceable G16.5 candelabra E12 bulb, not included; max 40W; LED setup rated 10W, 263 lumens, Ra≥90 Shade tilts ~90° up/down and rotates ~60° each side; open downward-directed shade has no fixed beam angle Corded version has 2.4 m cord with plug and switch on wall box; hardwired version mounts over 4-inch octagonal junction box; separate variants General wall sconce 60–72 inches above floor; bedside reading 35–43 inches; raise proportionally for high ceilings Projects 31.8 cm (~12.5 in) from wall; hallway guideline is ~4-inch projection, so not ideal for narrow hallways
Verified claims
- design
- Angular adjustable wall sconce with a conical shade
- dimensions
- 18 cm H x 14.5 cm W; projects 31.8 cm; wall plate ~9 cm covers a 4-inch octagonal junction box
- installation
- Installation guide included; certified electrician strongly recommended; mounts over a 4-inch octagonal junction box; wall must support weight
- light source
- Replaceable G16.5 candelabra E12 bulb, not included; max 40W; LED setup rated 10W, 263 lumens, Ra≥90
- dimming
- Phase dimmable with compatible wall dimmer; on-fixture switch is on/off only; dimmable bulb required
- adjustability
- Shade tilts ~90° up/down and rotates ~60° each side; open downward-directed shade has no fixed beam angle
- materials
- Spun steel and stainless steel shade; arm in steel, stainless steel and brass; wall bracket in spun steel and deep-drawn stainless steel
- finish
- White, Mossy Green, Orange painted spun-steel shades; interior painted white for soft light; brass only on arm of other variants
- material behavior
- Untreated brass surfaces develop a patina over time; damp cloth accelerates patination; patina is intended
- care
- Brass: dust with dry soft microfiber; avoid damp cloth, abrasives, solvents, bleach, ammonia; brass polish can restore shine but restarts aging
- care
- Painted steel: wipe clean with dry cloth; retailer does not supply replacement parts or repair information
- durability
- High-touch areas darken faster; uneven colour is normal; green spots in humid environments are a separate reaction
- electrical
- 120V/60Hz; cULus listed for dry locations; Class I grounded; IP20
- power connection
- Corded version has 2.4 m cord with plug and switch on wall box; hardwired version mounts over 4-inch octagonal junction box; separate variants
- controls
- Power switch is located on the wall mount/plate
- styling
- Minimalist conical design with matte finish; white baseline with Mossy Green and Orange as chromatic alternatives
- placement
- General wall sconce 60–72 inches above floor; bedside reading 35–43 inches; raise proportionally for high ceilings
- placement
- Mock up with painter's tape before finalizing electrical; account for furniture; adjust for fixture shape
- suitable uses
- Can flank a vanity mirror at 60–70 inches or mount above at 75–80 inches; dry location only, so not for damp/wet areas
- tradeoffs
- Projects 31.8 cm (~12.5 in) from wall; hallway guideline is ~4-inch projection, so not ideal for narrow hallways
- value
- 1435 CAD across all three colours; designer brand; no cheaper finish option
- shipping
- Online-only item ships directly from supplier; allow ~10 days; may arrive separately and in different packaging
- weight
- Fixture weighs about 2.7 lbs; wall must support the luminaire's weight
Product record
- Title
- Aj Angular Light Fixture
- Brand
- Louis Poulsen
- Price
- 1435 CAD
- Availability
- In stock
Buying Guide
0 comparisons · 3 sourcesUses
Aim light exactly where you need it
The Louis Poulsen AJ Angular wall sconce has an articulated, angular head that directs light precisely where you want it, making it a fit for tasks or spots that need targeted lighting. Its minimalist conical design adds a modern touch to any space. It has a built-in LED and plugs into a power outlet, with professional installation by a certified electrician strongly recommended.[1]
Adding a modern touch with directed light
This Louis Poulsen wall sconce has a minimalist, conical design meant to bring a modern touch to any space. Its angular head directs light exactly where you need it.[1]
Warm accent lighting beside a mirror
This wall-mounted sconce is aimed at adding a warm, localized wash of light to a wall, such as flanking a mirror as shown in the product imagery. It has a built-in LED and plugs into a power outlet, with the on/off switch located on the wall mount. An installation guide is included, and installation by a certified electrician is strongly recommended.[1,2,3]
Image Analysis
2 images- 01

Product
Two wall-mounted angular sconces with cone-shaped shades are visible on either side of a mirror; each sconce has a short angled neck and circular wall plate and is mounted to the wall with visible fasteners.
- Left sconce geometryWall-mounted sconce with a circular mounting plate, short cylindrical neck angled outward, and a teardrop/conical shade that points down and slightly left; light casts a warm wash on the wall below the shade.
1 region
x 0.03 · y 0.03 · w 0.20 · h 0.19 (high) - Right sconce geometryMirror-symmetric matching sconce on the right with circular mounting plate, short angled neck, and conical shade pointing down and slightly right; emits similar light wash on the wall.
1 region
x 0.79 · y 0.04 · w 0.17 · h 0.18 (high) - Mounting detailEach sconce attaches to the wall with a small round plate; at least one visible screw or fastener is present on each plate.
2 regions
x 0.05 · y 0.07 · w 0.05 · h 0.05 (high); x 0.88 · y 0.07 · w 0.04 · h 0.05 (high) - Finish and material appearanceBoth sconces appear to have a smooth, matte white painted metal finish visible on the shade and mounting plate.
2 regions
x 0.03 · y 0.03 · w 0.20 · h 0.19 (high); x 0.79 · y 0.04 · w 0.17 · h 0.18 (high) - Orientation relative to mirrorSconces are mounted on the wall on either side of a rectangular mirror, roughly aligned horizontally with the top of the mirror frame.
Other
Lifestyle bathroom scene showing a mirror, marble countertop with a square vessel sink, chrome faucet, potted plant, towels reflected in the mirror, and soft lighting from the sconces; neutral wall background and cabinetry below the countertop.
- Mirror and reflectionRectangular mirror with a metallic frame centered between the sconces; reflection shows hanging towels and a birdcage wall sticker or decal in the adjacent room.
1 region
x 0.33 · y 0.17 · w 0.34 · h 0.38 (high) - Countertop and sinkMarble-patterned countertop with a white rectangular vessel sink set on top and a chrome single-handle faucet mounted behind the sink.
1 region
x 0.12 · y 0.55 · w 0.76 · h 0.21 (high) - Potted plant propTall green succulent or snake-plant in a brown round pot placed on the left side of the countertop.
1 region
x 0.05 · y 0.56 · w 0.18 · h 0.28 (high) - Small accessoriesThree small toiletry items placed on the countertop: a cylindrical bottle near the plant, and two pump or bottle dispensers to the right of the sink.
2 regions
x 0.20 · y 0.66 · w 0.04 · h 0.13 (medium); x 0.64 · y 0.63 · w 0.07 · h 0.13 (medium) - CabinetryFlat-front light-colored cabinets with horizontal seams below the countertop visible in the lower part of the image.
1 region
x 0.06 · y 0.76 · w 0.88 · h 0.20 (high) - Lighting effectWarm localized wall wash under each sconce creating soft gradient illumination on the textured wall surface.
1 region
x 0.00 · y 0.00 · w 1.00 · h 0.40 (medium) - Shot compositionVertical portrait framing capturing the vanity area including both sconces, mirror, countertop, and part of cabinetry; image centered on mirror and sink.
Colors
matte white· sconce shade and mount- Left sconce geometryWall-mounted sconce with a circular mounting plate, short cylindrical neck angled outward, and a teardrop/conical shade that points down and slightly left; light casts a warm wash on the wall below the shade.
- 02

Product
Wall-mounted metal light fixture with a tapered conical shade connected to a short angled cylindrical neck and a straight cylindrical arm that meets a circular wall plate; a small rotary or push switch and two visible mounting screws appear on the plate.
- Shade shapeSingle-piece conical tapered shade with a wide circular opening at the front and a narrow junction at the rear where it meets the angled neck.
1 region
x 0.03 · y 0.43 · w 0.60 · h 0.36 (high) - Angled neckShort cylindrical neck set at an obtuse angle to the shade, forming a smooth junction between the shade and the straight arm.
1 region
x 0.40 · y 0.28 · w 0.25 · h 0.20 (high) - ArmStraight thin cylindrical arm extending horizontally from the neck to the wall plate.
1 region
x 0.57 · y 0.31 · w 0.28 · h 0.11 (high) - Wall plateCircular wall plate with a slightly raised rim; plate shows two visible recessed screw heads symmetrically placed and a small protruding rotary or push switch below the arm connection.
1 region
x 0.84 · y 0.30 · w 0.15 · h 0.22 (high) - Finish and material appearanceSmooth uniform matte finish across shade, neck, arm, and plate consistent with painted metal or coated metal surface.
- Switch detailSmall cylindrical knob or toggle protruding from the lower-right quadrant of the wall plate, aligned roughly below the arm.
1 region
x 0.87 · y 0.43 · w 0.04 · h 0.04 (high)
Other
Studio-style product shot on a plain white background with even soft lighting and minimal shadows; image framed to show the fixture in profile from a side angle.
- Background and lightingUniform white background with soft diffuse lighting producing subtle shading on the fixture surfaces and minimal cast shadow.
- Shot compositionFixture centered horizontally with the shade pointing left and wall plate on the right; image shows a side/profile view of the product.
- Image qualitySharp, high-resolution rendering with clear edges and visible small details such as screw heads and the switch.
Colors
matte white· shade#D9D5D3matte white· neck and arm#D9D5D3matte white· wall plate and switch#DAD6D3- Shade shapeSingle-piece conical tapered shade with a wide circular opening at the front and a narrow junction at the rear where it meets the angled neck.