TIPTOE
Core Edition Bracket Core Edition Set Of 2
The TIPTOE BRACKET Core Edition Set of 2 consists of L-shaped stainless steel wall mounts with threaded adjustment screws, knurled knobs, and circular pressure pads, used to clamp shelves, trays, or TIPTOE table legs to a wall for custom wall shelves, bookcases, bedside tables, desks, or bar tables. Each bracket measures 8.5 cm long, 6.5 cm wide, and 8 cm deep; screws and dowels are not included, and the set is designed and made in Europe.
- Material
- Stainless steel
- Category
- Hardware > Hardware Accessories > Brackets & Reinforcement Braces
Specifications
Set of two stainless steel wall-mount brackets for creating custom shelves, bookcases, bedside tables, desks, and bar tables.
Clamp design for installing shelves and trays; can combine with TIPTOE table legs to create wall-mounted work surfaces, bar tables, or desks; set of two; screws and dowels not included.
- Material
- Stainless steel
- Age Group
- adult
- Condition
- new
- Dimensions
- 8.5 x 6.5 x 8 cm
- Category
- Hardware > Hardware Accessories > Brackets & Reinforcement Braces
Additional Attributes
- Set of 2
- Wall mounts
- Clamp design
- For custom wall shelf, bookcase or bedside table
- Compatible with a wide range of shelves and trays
- Can combine with TIPTOE table legs
- For wall-mounted work surface, bar table or desk
- Stainless steel
- Screws and dowels not included
- Designed and made in Europe
- Length 8.5 cm (3.25 inches)
- Width 6.5 cm (2.5 inches)
- Depth 8 cm (3.25 inches)
Product Insights
Sold as a set of two brackets Stainless steel construction Rated 7 kg per bracket including the shelf, 14 kg for a pair Maximum shelf depth is 25 cm; two brackets support up to 150 x 25 cm Not a complete shelf; needs a compatible board, screws and anchors
Verified claims
- Set Contents
- Sold as a set of two brackets
- Material
- Stainless steel construction
- Finish
- Brushed stainless faces with dark threaded hardware and knurled knobs
- Clamp Design
- L-shaped clamp bracket uses a threaded rod, knob and pressure pad to grip a shelf or tray
- Dimensions
- Each bracket is 8.5 cm long, 6.5 cm wide and 8 cm deep
- Shelf Thickness
- Accepts shelves from 20 mm to 41 mm thick
- Shelf Material
- Use wood, particleboard, plywood, laminate or MDF; not glass, marble or stone
- Wall Anchoring
- Drywall is acceptable only with anchors suited to the board and load
- Included Hardware
- Screws and wall plugs are not included; three are needed per bracket
- Screw Size
- Mounting holes fit Ø 4–4.5 mm screws, roughly #8 to #10
- Tightening Warning
- Tighten set screws until the board is secure; over-tightening can bend the clips
- Max Shelf Dimensions
- Maximum shelf depth is 25 cm; two brackets support up to 150 x 25 cm
- Leg Pairing
- Pairs with TIPTOE table legs to build wall-mounted desks, bars and worktops
- Stability Tips
- If the top contacts a wall, add cleats and fasten at the rear to prevent tilt
- Care
- Stainless steel needs no special maintenance; wipe with a microfiber cloth
- Use Environment
- Recommended indoors or in covered outdoor areas
- Suitable Uses
- Shelves, bookcases, bedside tables, wall-mounted desks, bar tables and work surfaces
- Tradeoffs
- Not a complete shelf; needs a compatible board, screws and anchors
Product record
- Title
- Core Edition Bracket Core Edition Set Of 2
- Brand
- TIPTOE
- Price
- 159 CAD
- Availability
- In stock
Buying Guide
1 comparison · 12 sourcesUses
Build your own wall shelving
These wall mounts use a clamp design to hold a wide range of shelves and trays, so you can build a custom wall shelf, bookcase, or bedside table to suit your space and style. Pair them with TIPTOE table legs to create a wall-mounted work surface or desk.[1]
Build a wall-mounted table or work surface
These wall mounts are designed to connect a tabletop to the wall, and can be combined with TIPTOE table legs to build a wall-mounted work surface, bar table, desk, or dining table. TIPTOE describes them as a way to extend an existing worktop or kitchen island as well. Suitable for makers planning a custom wall-attached table setup.[1,2,3]
Build a custom wall-mounted shelf or table
Use these TIPTOE BRACKET wall mounts to create a custom wall shelf, bookcase, bedside table or wall-mounted table. Before installing, note that screws and wall plugs are not included with the brackets — you will need 3 screws and wall plugs suited to your wall for each mount.[1,4]
Determine Load Capacity of Shelf
Check the weight limits before installation. When using a single bracket, the maximum load per shelf is seven kilograms, but using two brackets increases this maximum capacity to fourteen kilograms. The overall maximum weight the entire wall-mounted setup can hold, including the tabletop, is seventy kilograms.[2,4]
Build a wall-mounted table with your own tabletop
These TIPTOE brackets pair with the brand's table legs and a tabletop you choose, for setups up to 180 by 100 cm with two legs and two brackets. TIPTOE recommends tabletops 30 to 41 mm thick in materials like solid wood, plywood, or MDF, and advises against brittle materials such as glass, marble, or stone.[2]
Careful tightening during assembly
When assembling a TIPTOE wall-mounted table setup with these brackets, tighten the fittings with the Allen key gently. TIPTOE cautions against overtightening, since too much force could bend the table leg.[2]
Product comparison
Compared within this brand.
| Core Edition Bracket Core Edition Set Of 2: Choose these stainless steel clamp-style wall brackets if you want to build a custom wall shelf, bookcase, or bedside table, or pair them with TIPTOE table legs to create a wall-mounted desk, bar table, or work surface. The clamp design accepts a wide range of shelf and tray boards—ideally solid wood, plywood, laminate, or MDF rather than brittle materials like glass, marble, or stone—and each shelf holds up to 7 kg per bracket, or 14 kg with the two included in this set. Note that screws and wall plugs are not included, so you will need three screws and plugs suited to your wall per bracket.[1,2,4] | Bracket Wall Mounts Set Of 2: Choose this if you want to build custom wall-mounted storage — shelves, bookcases, bedside tables, or, combined with TIPTOE table legs, a wall-mounted work surface or desk. The set of two thermolacquered steel brackets uses a clamp that accepts a wide range of shelves and trays, and they suit solid walls (concrete, brick) and drywall with appropriate anchors, though fragile or very thin walls without reinforcement should be avoided. Note that screws and wall plugs are not included, and per the brand's manual the screws may loosen with prolonged use.[5,6,7,8] | 75 Cm Dining Table And Desk Legs Set Of 4: Choose this for a sturdy, commercial-grade solution in steel that is fully made in Europe and includes a lifetime functional warranty. These tapered legs feature a sleek design and can be combined with your own chosen tabletop to create a custom dining, desk, or console. Be sure to avoid using brittle materials like glass or marble with these legs, as overtightening may cause bending.[9,10,11,12] |
Image Analysis
2 images- 01
Product
Two L-shaped metal brackets shown side by side; each bracket has a threaded screw with a knurled round knob and a circular pressure pad on the screw shaft. Brackets have a brushed metal finish with rounded outer corners and countersunk holes on interior faces.
- Overall geometryEach unit is an L-shaped bracket formed from a single folded metal plate creating a 90-degree inside corner with both flanges of similar width and rounded outer corners.
1 region
x 0.10 · y 0.46 · w 0.80 · h 0.40 (high) - Brushed metal finishExterior and interior flat faces show a horizontal brushed-metal texture with subtle directional grain and soft highlights.
1 region
x 0.10 · y 0.46 · w 0.80 · h 0.30 (high) - Threaded screw and knobA threaded rod passes through one flange of each bracket and is terminated with a round, knurled adjustment knob; threads and knob are darker metal than the bracket faces.
2 regions
x 0.05 · y 0.62 · w 0.36 · h 0.20 (high); x 0.56 · y 0.57 · w 0.36 · h 0.28 (high) - Circular pressure padLeft bracket shows a circular pad or spacer on the screw adjacent to the inner flange; pad appears lighter and slightly reflective.
1 region
x 0.22 · y 0.57 · w 0.14 · h 0.12 (high) - Countersunk holeInterior horizontal flange of the left bracket shows a countersunk screw hole; the hole is visible on the base face.
1 region
x 0.26 · y 0.63 · w 0.08 · h 0.06 (medium) - Small arrow markA small arrow-shaped mark is visible near the screw entry on the outer face of each bracket pointing toward the screw.
2 regions
x 0.17 · y 0.60 · w 0.04 · h 0.04 (medium); x 0.76 · y 0.52 · w 0.04 · h 0.04 (medium) - Rounded outer edgesOuter vertical edges of the brackets are rounded rather than sharp, visible as a softened radius on the top edges.
1 region
x 0.50 · y 0.44 · w 0.28 · h 0.24 (high)
Other
Studio product shot with neutral beige background and soft directional lighting from upper left producing soft shadows to the lower right; image cropped with product centered in lower half.
- Shot compositionTwo brackets are placed on a flat neutral surface with space between them; camera angle is slightly elevated and frontal, showing interior faces and top edges.
- Lighting and shadowsSoft directional lighting from upper left creates gentle highlights on metal faces and soft diffuse shadows extending down and to the right from the brackets and knobs.
- ReflectionsBrushed faces show soft environmental reflections and specular highlights consistent with studio lights; knobs show tighter specular highlights.
Colors
brushed silver· bracket facesgunmetal gray· threaded rod and knobpale silver· circular pad- Overall geometryEach unit is an L-shaped bracket formed from a single folded metal plate creating a 90-degree inside corner with both flanges of similar width and rounded outer corners.
- 02
Product
Single L-shaped metal bracket with brushed-silver finish, a round adjustable pad mounted on the lower plate, and a black threaded screw with a knurled thumb nut visible beneath the lower plate.
- Overall shapeL-shaped right-angle bracket composed of a horizontal top plate, a vertical web, and a horizontal lower plate; plates have rounded outer corners and a consistent thickness.
1 region
x 0.14 · y 0.06 · w 0.64 · h 0.72 (high) - Finish and textureBrushed metallic surface visible as fine linear grain on the horizontal and vertical plates, producing soft specular highlights and subtle directional sheen.
1 region
x 0.14 · y 0.06 · w 0.64 · h 0.72 (high) - Top plate detailFlat rectangular top plate with rounded front-right corner and a sharp inner bend where it meets the vertical web.
1 region
x 0.18 · y 0.06 · w 0.56 · h 0.32 (high) - Vertical plate holesVertical web contains two circular countersunk holes arranged vertically near the right edge; countersinks show concentric shading.
1 region
x 0.58 · y 0.28 · w 0.22 · h 0.26 (high) - Lower plate detailLower horizontal plate mirrors the top plate with rounded outer corners and a rectangular slot or recess near the left edge adjacent to the round pad.
1 region
x 0.16 · y 0.42 · w 0.56 · h 0.28 (high) - Round adjustable padCylindrical round puck centrally mounted on the lower plate with a recessed circular center opening; puck has a smooth, slightly matte light-silver to off-white finish and casts a small shadow on the plate.
1 region
x 0.32 · y 0.50 · w 0.30 · h 0.18 (high) - Threaded screw and knurled nutBlack threaded rod projects downward from the lower plate and terminates in a textured knurled circular thumb nut; both the thread and knurl texture are visible and appear matte black.
1 region
x 0.36 · y 0.64 · w 0.20 · h 0.30 (high)
Other
Studio product shot on a white background with soft, even lighting and a faint shadow beneath the bracket; image centered and cropped to include the full assembly.
- Background and lightingUniform off-white background with soft directional lighting from upper-left creating gentle highlights on metal surfaces and a diffuse shadow beneath the product.
- Shot compositionThree-quarter perspective view slightly above the bracket, showing top plate, lower plate, vertical web, and underside screw in a single frame.
- Image qualityHigh resolution with clear fine detail; no visible packaging or props; minimal vignetting.
Colors
brushed silver· brushed metal plateslight silver· round puckmatte black· threaded screw and knurled nut- Overall shapeL-shaped right-angle bracket composed of a horizontal top plate, a vertical web, and a horizontal lower plate; plates have rounded outer corners and a consistent thickness.
Brand PDP Lookup
- Brand
- TIPTOE
BRACKET wall shelf in solid oak - CORE Edition