Branch
Verve Headrest
The Verve Headrest is an add-on for the Branch Verve chair, designed to provide additional neck and shoulder support. It features a contoured foam core, a polymer frame, and a 3D knit polyester fabric cover, with adjustable height from 9.5 to 11 inches. Its dimensions are 12 inches wide by 3.5 inches long, it installs in minutes, and it is rated commercial grade.
- Material
- Polymere frame, 3D knit polyester fabric
- Category
- Furniture > Chair Accessories
Color
Size
Specifications
A stylish and supportive headrest for the Verve chair, made with contoured foam and a polymer frame with 3D knit polyester fabric, offering adjustable height and commercial-grade durability.
Polymere frame, 3D knit polyester fabric, adjustable height, commercial grade, contoured foam, neck and shoulder support
- Material
- Polymere frame, 3D knit polyester fabric
- Secondary
- plastic
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Dimensions
- 3.5x12x9.5-11 in
- Category
- Furniture > Chair Accessories
Additional Attributes
- adjustable height
- commercial grade
- contoured foam
- 3D knit polyester fabric
- polymere frame
- installs in minutes
- neck and shoulder support
Product Insights
The Verve Headrest is a commercial-grade, color-matched neck support accessory exclusively for Branch Verve chairs with factory threaded inserts, offering stepless height adjustment within a 1.5-inch range and high-density foam for even weight distribution. It installs easily with an Allen key and provides durable adjustability, but the cover is non-removable and spot-clean only, with potential pilling over time.
- Mounting
Bolts into factory threaded inserts, preventing clamp damage and shifting.
Why this is supported
The Verve Headrest attaches to threaded inserts on the Verve chair's backrest frame, avoiding the indentations and scuffs typical of clamp-on headrests. The bolted connection also prevents shifting downward under use. Installation takes minutes with the included Allen key. Note that chairs produced before the headrest was available may lack the inserts, so a physical check is advisable.
- Height adjustment
Stepless height slider allows any position within 1.5-inch range.
Why this is supported
The friction-based slider provides continuous adjustment across a 1.5-inch range, allowing precise positioning without the fixed notches found on many aftermarket headrests.
- Commercial grade
Manufacturer rates it commercial grade for daily office use.
Why this is supported
The headrest carries a 'commercial grade' rating alongside the Verve chair, indicating it has been tested for repeated adjustment cycles and sustained daily use, a claim not made by generic aftermarket models.
- Color match
Uses the same 3D knit polyester as the Verve chair, available in all six colorways.
Why this is supported
The headrest is made from the same 3D knit polyester used in the Verve chair and is offered in all six matching upholstery colors.
a design cohesion that generic aftermarket headrests in universal black mesh cannot replicate
Why choose the OEM headrest over universal alternatives — aesthetic_continuityBuyers have described the Verve chair as having a less industrial appearance; the headrest extends that design language. The fabric is spot-cleanable to maintain color parity, and the commercial-grade construction ensures the matched finish resists fading and pilling over years of use.
wanted something less industrial looking
u/quakerwildcat in r/OfficeChairsThe headrest is upholstered in the same 3D knit polyester as the Verve chair and available in all six colorways (Lunar Grey, Mist, Wheat, Mint, Galaxy, Cobalt), ensuring a cohesive look that generic headrests cannot match.
- Compatibility
Fits only Branch Verve chairs with factory-installed threaded inserts.
Why this is supported
Research confirms the headrest is intended only for Branch’s Verve chair, and among those, only chairs with factory-installed threaded inserts on the backrest frame. As one source states:
The Verve Headrest is designed exclusively for the Branch Verve Chair. It is compatible only with that specific chair model and cannot be mounted on other office chairs.
Which specific chair models is this headrest compatible with? Is it designed exclusively for the Verve chair or can it be mounted on other office chairs?Another source adds:
chairs produced before the headrest accessory launched may lack these anchor points, making a physical check for threaded inserts on the rear of the chair the only reliable way to confirm fitment before purchase.
Compatibility: which Verve Chair models fit the headrest — factory_mounting_points_as_compatibility_gateTaken together, these verifications confirm that the headset fits exclusively Verve chairs equipped with the required mounting points.
- Installation
Installs in minutes using the included Allen key and pre-existing threaded inserts.
Why this is supported
The headrest uses pre-existing threaded inserts on the Verve chair frame. One source states:
The headrest attaches using the included Allen key — it installs in minutes with no additional tools required.
How exactly does the headrest attach to the chair? Is it tool-free, and does it require existing mounting points or does it clamp onto the backrest?This bolt-on method contrasts with universal clamp-on headrests, described as
a bolt-on job that avoids the trial-and-error positioning and clamp tightening that makes universal headrests a frustrating half-hour setup
Why choose the OEM headrest over universal alternatives — installation_time_and_toolingAdditionally, the hardpoint mount provides stability; research notes it
cannot shift downward under weight — a common failure of aftermarket clamp-on headrests
Why choose the OEM headrest over universal alternatives — mounting_system_stabilityensuring the headrest stays secure over time.
- Durability
Commercial-grade construction ensures the stepless mechanism withstands daily adjustment cycles.
Why this is supported
The stepless adjustment mechanism is part of a headrest rated
Rated 'commercial grade' alongside the Verve chair, the headrest is built to withstand the repeated adjustment cycles and sustained load of a daily-use office environment
Why choose the OEM headrest over universal alternatives — commercial_grade_durability_certification, indicating the friction slider is engineered for frequent repositioning over the product's lifespan.
- Foam comfort
High-density contoured foam distributes weight evenly for neck support.
Why this is supported
The headrest's foam is described as
high-density foam that provides cloud-like comfort and even weight distribution
What is the density or firmness of the contoured foam? Does it have a specific rating (e.g., ILD) or intended support level for prolonged sitting?and the contoured shape provides
even weight distribution
What is the density or firmness of the contoured foam? Does it have a specific rating (e.g., ILD) or intended support level for prolonged sitting?across neck and shoulders. Brand communications suggest the chair offers
a medium-firm support that's more forgiving than the Ergonomic
u/AustinBranch in r/OfficeChairs, implying the headrest's foam follows the same feel.
- Maintenance
Cover is non-removable and not machine-washable; spot-clean only.
Why this is supported
The product Q&A confirms
The cover is not removable and is not machine-washable
What is the recommended method for cleaning the 3D knit polyester fabric, and is the cover removable and machine-washable?, meaning only spot treatment is possible. Spills that penetrate could affect foam longevity.
- Cleaning
Cover is non-removable and spot-clean only.
Why this is supported
The brand’s FAQ directs:
The cover is not removable and is not machine-washable
What is the recommended method for cleaning the 3D knit polyester fabric, and is the cover removable and machine-washable?— so any spill must be handled immediately since it cannot be taken off for deep cleaning.
- Pilling
Buyers report pilling over months of use, not covered by warranty.
Why this is supported
A Branch representative responded to a pilling concern on Reddit, acknowledging the feedback and stating that
normal wear like pilling isn't typically covered.
u/AustinBranch in r/OfficeChairs— this confirms that pilling is not covered under the 7-year warranty, so it's an ongoing risk for the 3D knit fabric.
Image Analysis
3 images- 01
Product
Rear view close-up of a padded rectangular headrest and the upper portion of a matching mesh-backed chair with a vertical mounting post; visible upholstery shows tight woven texture and a rounded rectangular plastic frame.
- Headrest cushion shapeRounded rectangular cushion with gently curved corners and a slim perimeter seam, shown from the rear.
1 region
x 0.18 · y 0.03 · w 0.64 · h 0.30 (high) - Headrest upholstery textureTight woven textile cover with a small basketlike weave visible across the headrest surface.
1 region
x 0.22 · y 0.06 · w 0.58 · h 0.22 (high) - Perimeter pipingNarrow seam or piping running around the outer edge of the headrest, following the rounded rectangle contour.
1 region
x 0.18 · y 0.03 · w 0.64 · h 0.30 (medium) - Vertical mounting postCentral vertical support post attaching the headrest to the backrest; smooth matte finish and slightly rounded front face.
1 region
x 0.40 · y 0.18 · w 0.20 · h 0.42 (high) - Upper backrest frameRounded rectangular plastic frame at the top of the backrest with a continuous outer lip and a narrow gap between frame and mesh panel.
1 region
x 0.06 · y 0.40 · w 0.88 · h 0.30 (high) - Backrest mesh patternEvenly textured mesh panel inset within the frame showing a repeating small geometric/textured motif across the visible area.
1 region
x 0.12 · y 0.52 · w 0.76 · h 0.42 (high)
Other
Studio product shot with even soft lighting on a neutral light gray background; image is tightly cropped around the upper chair and headrest.
- Background and lightingUniform light gray background with soft, diffuse lighting and minimal shadows.
- Shot compositionClose-up rear/detail view focused on the headrest and upper backrest, cropped at the lower edge of the backrest and near the top of the headrest.
- Image qualityHigh resolution with clear texture detail and no visible noise or motion blur.
Colors
pale sage green· headrest upholstery#BEC3BAmuted sage green· mounting post and frame#BEC4B9cool pale sage· backrest mesh panel#C3C9BD- Headrest cushion shapeRounded rectangular cushion with gently curved corners and a slim perimeter seam, shown from the rear.
- 02
Product
Upholstered office chair with high back and separate rectangular headrest, S-shaped fixed armrests, five-star plastic base with caster wheels, shown from a slight front-left three-quarter angle.
- Headrest shape and finishDetached rectangular headrest with rounded corners, fully upholstered in the same light sage fabric as the seat, mounted above the backrest and slightly offset rearward.
1 region
x 0.35 · y 0.03 · w 0.29 · h 0.14 (high) - Backrest surface patternTall, slim backrest upholstered with a repeating small triangular/pyramid quilted texture on the central panel bordered by smooth fabric on the edges.
1 region
x 0.28 · y 0.16 · w 0.43 · h 0.48 (high) - Seat cushion profileThick upholstered seat cushion with gently rounded front edge and smooth fabric matching the backrest color, mounted on a molded plastic seat frame.
1 region
x 0.29 · y 0.56 · w 0.42 · h 0.18 (high) - Armrest geometryPair of S-shaped fixed armrests molded from matte plastic in the same sage color; each armrest has a flat top pad and a single curved support connecting to the seat frame.
2 regions
x 0.18 · y 0.51 · w 0.20 · h 0.20 (high); x 0.62 · y 0.50 · w 0.20 · h 0.20 (high) - Adjustment mechanism and seat undersideExposed mechanical adjustment housing and metal fasteners visible beneath the front of the seat, finished in the same sage plastic with visible pivot points and a small black fastener head.
1 region
x 0.34 · y 0.67 · w 0.30 · h 0.12 (high) - Base and columnFive-star molded plastic base in matching sage color with a central black metal/plastic gas lift column connecting to the seat; base arms are broad and taper to caster housings.
2 regions
x 0.23 · y 0.76 · w 0.53 · h 0.20 (high); x 0.47 · y 0.68 · w 0.07 · h 0.14 (high) - CastersFive black double-wheel casters with glossy black wheel faces attached to the ends of the base arms.
2 regions
x 0.14 · y 0.85 · w 0.14 · h 0.12 (high); x 0.76 · y 0.86 · w 0.10 · h 0.11 (high)
Other
Studio product shot on a uniform light gray background with soft shadow beneath the chair; frontal three-quarter composition slightly facing left.
- Background and shadowEven light gray background with a soft, diffuse shadow under and slightly behind the chair indicating overhead frontal lighting.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (medium) - Shot angleChair photographed from a front-left three-quarter view, showing both armrests and most of the base while the right rear leg is partially hidden.
- Image qualityHigh-resolution studio image with even focus and no visible noise or compression artifacts.
Colors
light sage green· upholstery (headrest, backrest, seat)#ADB2AClight sage green (plastic)· molded plastic frame and armrests#ACB2ABblack· column and caster wheels#1C1C1C- Headrest shape and finishDetached rectangular headrest with rounded corners, fully upholstered in the same light sage fabric as the seat, mounted above the backrest and slightly offset rearward.
- 03
Product
Rear three-quarter view of an office chair showing a padded rectangular headrest on a vertical support, a tall fabric back with a visible small lumbar pad, an integrated curved structural frame, Z-shaped armrests, and a five-star caster base with a visible black gas-lift cylinder.
- HeadrestRectangular padded headrest with rounded corners, covered in the same textured fabric as the back, mounted on a single central vertical plastic support that descends behind the backrest.
1 region
x 0.38 · y 0.03 · w 0.22 · h 0.11 (high) - Backrest surfaceTall backrest upholstered in a textured fabric showing a subtle repeating small triangular/geometric pattern across the visible face.
1 region
x 0.28 · y 0.17 · w 0.48 · h 0.52 (high) - Lumbar padSeparate small rounded rectangular lumbar cushion attached to the lower-mid back area, covered in matching fabric and mounted inside the frame opening.
1 region
x 0.34 · y 0.43 · w 0.19 · h 0.12 (high) - Structural frameVisible rigid outer frame that wraps the perimeter of the back and forms a V-shaped/supporting diagonal on the visible side; frame is the same color as the chair fabric but appears to be molded plastic with a smooth matte finish.
1 region
x 0.22 · y 0.14 · w 0.55 · h 0.58 (high) - ArmrestOne visible armrest on the right side of the image with a Z-shaped profile; armrest top is flat and gently rounded, made of the same molded plastic as the frame and finished to match.
1 region
x 0.58 · y 0.36 · w 0.28 · h 0.24 (high) - Seat cushion edgePadded seat cushion visible from the rear-right angle, upholstered in the same textured fabric as the back and headrest, with a smooth rounded front edge.
1 region
x 0.46 · y 0.45 · w 0.35 · h 0.18 (high) - Base and castersFive-star molded plastic base in the same color as the frame with five dual-wheel black casters mounted at each leg tip; central vertical gas-lift column is black metal/plastic.
2 regions
x 0.18 · y 0.72 · w 0.64 · h 0.26 (high); x 0.48 · y 0.67 · w 0.06 · h 0.10 (high)
Other
Studio product shot on a neutral light gray background with soft shadow beneath the chair; image shows the chair centered and fully visible from rear three-quarter angle; lighting is even and diffuse.
- Shot compositionChair centered in frame, photographed from a slightly elevated rear-right three-quarter angle showing back, headrest, seat edge, armrest, and base.
- Background and lightingUniform light gray background with a soft drop shadow under the base indicating diffuse studio lighting and even illumination across the product.
Colors
sage green· upholstery (back, seat, headrest, lumbar pad)#A6B0A5matte sage green plastic· frame, armrests, base#A6B1A5black· casters and gas-lift column#242425- HeadrestRectangular padded headrest with rounded corners, covered in the same textured fabric as the back, mounted on a single central vertical plastic support that descends behind the backrest.
Documents & Data
Reddit Insights
4 threads · r/OfficeChairsReddit opinions on the Branch Verve chair and its optional headrest are decidedly mixed, with praise for its aesthetics and initial comfort but strong criticism regarding seat height, non-locking armrests, and durability concerns like fabric pilling.
While some users appreciate the design and find it comfortable for all-day use, a significant number report that the chair sits lower than expected, causes back pain, and has armrests that slide down. The fabric is prone to pilling and this normal wear is not covered under warranty, leading to frustration.
Themes
Use Cases
- Work-from-home / home office (8+ hour days)
- Users seeking an aesthetic, less industrial alternative to high-end chairs
Watch Out For
Community Q&A
- What height range is the Verve suitable for?
- Best for people between 5'0" and 5'10", per the company, but some taller users complain the seat is too low and they sink into it.
- How does the Verve compare to the Herman Miller Aeron?
- The Verve is less industrial looking but sits several inches lower and feels less durable; many recommend trying before buying.
- Does the fabric hold up over time?
- Some users report pilling on the seat fabric within months; this is considered normal wear and not covered by warranty.
- Is the Verve comfortable for long hours?
- Opinions vary: some find it great right away, while others experience back pain after short periods.
Compared To
vs Herman Miller Aeron
The Verve sits significantly lower than the Aeron and has less durable materials; users report sinking into the seat.
vs Other Branch models (Versus Ergonomic Pro)
Potential buyers often cross-shop the Verve with Branch's Ergonomic Pro, seeking guidance on fit.
Source Threads
User considers Branch Verve for home office
How does this chair compare to the Verve? I'm trying to decide between the two...
u/paulakreiderr/OfficeChairsView thread →
Comparison to Aeron reveals seat height mismatch
I love my Herman Miller Aeron chair but and my wife has been borrowing it but wanted something less industrial looking for her home office. She went for the Verve chair based only on reviews. Big mistake. It is advertised as having roughly the same seat height range as the Aeron, but in practice, it's 2-3 inches lower. The Aeron props you up but you sink into the Verve. Now we have to figure out how to disassemble it for return. Don't buy this chair sight unseen.
u/quakerwildcatr/OfficeChairsView thread →
Verve chair causes severe back pain after short use
this one (the Verve) is KILLING my back. Do you have any recommendations? I don't know what it is, but I can barely sit for two hours without pain.
u/CranesAreRadr/OfficeChairsView thread →
Company rep details Verve fit, comfort, and warranty
The Verve might actually be perfect for you at 5'5" - it's designed with a slightly smaller frame that works great for folks between 5' and 5'10", and you wouldn't need a footrest like some people do with our Ergonomic chair. The Verve has a medium-firm support that's more forgiving than the Ergonomic, which some find more comfortable for those 8+ hour days. About the pilling concern - we've definitely heard this feedback and have made improvements to our fabric quality over the years. Our chairs come with a 7-year warranty that covers manufacturing defects, though normal wear like pilling isn't typically covered. That said, many customers have had their chairs for years without issues.
u/AustinBranchr/OfficeChairsView thread →