TIPTOE
75 Cm Steel Table And Desk Legs Core Edition Set Of 4
TIPTOE Core Edition steel table and desk legs are a set of four 75 cm (29.5") legs designed to build a dining table, desk, or console using a user-supplied tabletop. Each leg measures 6 cm (2.25") wide and 6 cm (2.25") deep, is made of sturdy steel, and installs without tools via clamping screws. Designed and made in Europe; please allow approximately 5 days before shipment, subject to slight variation due to vacations or holidays.
- Material
- steel
- Category
- Furniture > Table Accessories > Table Legs
Specifications
Set of four 75 cm steel furniture legs for building a custom dining table, desk, or console with tool-free installation.
Tool-free installation with clamping screws; sturdy and durable steel; 75 cm height; set of 4; designed and made in Europe; compatible with custom table, desk, or console tops.
- Material
- steel
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Dimensions
- 6 x 6 x 75 cm
- Category
- Furniture > Table Accessories > Table Legs
Additional Attributes
- 75 cm height
- 6 cm width
- 6 cm depth
- set of 4
- steel construction
- sturdy and durable
- designed and made in Europe
- tool-free installation
- clamping screws
- compatible with dining table, desk, or console tops
- customizable color options
- Core Edition
- TIPTOE
- sleek design
- matches all interior styles
Product Insights
75 Cm Steel Table And Desk Legs Core Edition Set Of 4 Brushed stainless steel, bare metal (CORE Edition) Tool-free clamp mounting, with no drilling into the tabletop Four legs suit tops up to about 180 x 100 cm Rated for 70 kg total, including the tabletop Best with wood, laminate, MDF or plastic; avoid glass, marble and stone
Verified claims
- dimensions
- 75 cm tall; 6 x 6 cm top-plate footprint per leg
- included
- Set of 4 legs with built-in clamps, hand knobs and an Allen key; no tabletop
- installation warning
- Do not overtighten with the Allen key — the bracket can bend
- compatibility
- Fits tabletops roughly 30–40 mm thick, 41 mm absolute maximum
- sizing
- Four legs suit tops up to about 180 x 100 cm
- large tables
- Over 150 cm use a 40 mm top; over 180 cm add legs
- load capacity
- Rated for 70 kg total, including the tabletop
- top materials
- Best with wood, laminate, MDF or plastic; avoid glass, marble and stone
- repainting
- Repainting is advised against
- design
- Tapered rectangular profile with an engraved TIPTOE mark
- construction
- Hollow shaft with internal threaded rod and knurled adjustment screw
- floor contact
- Small flat foot pad; consider glide caps on hard floors
- height fit
- 75 cm suits standard dining-table and desk height
- uses
- Dining table, desk, console and worktop builds
- origin
- Designed and made in Europe
- value
- Build-your-own furniture value; pair with your own top
- variants
- One variant offered; colour listed as assorted
Product record
- Title
- 75 Cm Steel Table And Desk Legs Core Edition Set Of 4
- Brand
- TIPTOE
- Price
- 795 CAD
- Availability
- In stock
Buying Guide
1 comparison · 12 sourcesUses
Build a custom dining table, desk, or console with your own top
Add these TIPTOE steel legs to a tabletop of your choice to create a custom piece of furniture in a style that suits your space. Per the merchant, the clamping-screw design lets you assemble the table, desk, or console without tools in minutes.[1]
Build a custom table or desk without DIY
These TIPTOE steel legs clamp onto a tabletop you choose, so you can build a dining table, desk, or console in minutes with no drilling or DIY work. They fit tabletops 1.2 to 1.6 inches thick in materials like solid wood, plywood, or laminate, and the clamp system means you simply position the legs, tighten the hand knob, and finish with the included Allen key. TIPTOE advises not to overtighten, since that can bend a leg outward, and warns against brittle tops like glass, marble, or stone.[1,2,3,4,5]
Pair a custom tabletop with these 75 cm legs
If you have a tabletop or want to source one, these legs pair with tops from 1.2 to 1.6 inches thick, made of wood-based materials like solid wood, plywood, particleboard, laminate, or MDF. The top can measure up to 70.9 inches long by 39.4 inches wide and weigh up to 154.3 pounds; tops longer than 70.9 inches call for a 1.6-inch thickness and extra sets of legs, and brittle materials like glass, marble, or stone are not recommended.[3,4]
Low-maintenance steel legs for indoor or covered outdoor use
The powder-coated steel legs need no special maintenance beyond an occasional wipe with a microfiber cloth, per the brand, and come with anti-UV and anti-corrosion treatment. TIPTOE recommends keeping them indoors or in a covered outdoor area to protect against the elements, and advises against repainting them since new paint may not adhere evenly.[2,3]
Styling a custom table to match your interior
Pair these steel legs with a top of your choice to build a dining table, desk, or console that fits your decor, choosing the leg colour you like best. The seller describes the sleek design as matching all interior styles. Installation is tool-free thanks to the clamping screws, so the piece can come together quickly.[1]
Product comparison
Compared within this brand.
| 75 Cm Steel Table And Desk Legs Core Edition Set Of 4: Choose these if you want to build a custom dining table, desk, or console by pairing legs with a tabletop of your own choosing, since the clamping system installs without tools in minutes and works with tabletops 3 to 4 cm (1.2 to 1.6 inches) thick made of wood, particleboard, plywood, laminate, or MDF. The set of four stainless steel legs stands 75 cm (29.5 inches) tall and supports up to 70 kg (154.3 lbs) including the tabletop, with a maximum tabletop size of 180 by 100 cm (70.9 by 39.4 inches), and the steel needs no special maintenance beyond an occasional microfiber cloth wipe. Note that TIPTOE recommends indoor or covered outdoor use to protect against corrosion, brittle tabletop materials like glass, marble, or stone are not supported, and you should avoid overtightening the screws since that could bend the legs.[1,3,4,5] | 75 Cm Dining Table And Desk Legs Set Of 4: Choose this if you want to build your own dining table, desk, or console by pairing a tabletop with this set of four 75 cm (29.5 inch) steel legs, which clamp on and assemble in minutes without tools apart from the included Allen key for final tightening. The powder-coated steel legs with anti-UV and anti-corrosion treatment come in colours from Graphite Black and Off White to brighter shades, and the brand describes the modular design as easy to disassemble and reuse if you move. Note the limits: TIPTOE advises against glass, marble, or stone tabletops, caps a four-leg setup at 180 x 100 cm, and warns that overtightening the screws can bend the legs.[2,6,7,8,9,10,11] | New Modern Eco-Certified Wood Table: Choose this if you want a round dining table that seats four to six people, with a 43.25-inch (110 cm) diameter and 29.5-inch (75 cm) height in a single size. It's described by the retailer as versatile, timeless, and durable, with a solid wood tabletop with oak veneer from sustainably managed forests, powder-coated steel legs, and commercial-grade construction made entirely in Europe. Light assembly is required, but hardware and tools are included, and it comes in Black, Eucalyptus Grey, Off White, or Baby Blue.[12] |
Image Analysis
2 images- 01
Product
Single tapered steel table/desk leg shown upright with a top mounting clamp assembly and a small bottom foot pad. Brushed metal finish with a narrow rectangular-to-tapered profile and a vertical engraved brand mark on the shaft.
- Overall shapeUpright single metal leg with a long tapered rectangular profile that narrows from the top toward a small flat foot at the base.
1 region
x 0.42 · y 0.05 · w 0.16 · h 0.90 (high) - Top mounting clampSquare-top mounting clamp assembly consisting of a flat upper plate, a vertical clamp face with an adjusting bolt and a small horizontal support plate; components appear integral to the leg top.
1 region
x 0.46 · y 0.05 · w 0.08 · h 0.12 (high) - Bottom foot padSmall flat metal foot pad welded or formed at the narrow end of the taper, visible as a short rectangular tab contacting the surface.
1 region
x 0.49 · y 0.88 · w 0.04 · h 0.07 (high) - Surface finishUniform brushed metal finish with vertical grain visible on the shaft and slightly reflective highlights on edges and flat faces.
1 region
x 0.42 · y 0.10 · w 0.16 · h 0.70 (high) - Shaft engraving“Vertical engraved or stamped text reading TIPTOE on the upper-mid shaft of the leg.”
1 region
x 0.47 · y 0.18 · w 0.06 · h 0.12 (high)
Other
Studio-style product shot centered on a plain light background with soft even lighting and a subtle shadow beneath the foot; no props or packaging visible.
- Shot compositionSingle item centered vertically in the frame on a plain light background with ample empty space around the product.
- Lighting and shadowSoft, even studio lighting with faint shadow directly beneath the bottom foot indicating a light source from above; minimal specular reflections on metal edges.
- Image qualityHigh resolution, sharp focus on the leg and mounting hardware; no visible noise or compression artifacts.
Colors
brushed stainless steel· leg body#A5A29D- Overall shapeUpright single metal leg with a long tapered rectangular profile that narrows from the top toward a small flat foot at the base.
- 02
Product
Close-up of a single brushed-steel rectangular table leg shown diagonally with an L-shaped top mounting plate, an internal threaded rod and knurled adjustment screw, and the brand name stenciled on the shaft.
- Rectangular shaftLong hollow rectangular steel leg with rounded outer edges and a long narrow rectangular cutout along one face revealing interior components.
1 region
x 0.06 · y 0.20 · w 0.72 · h 0.70 (high) - Brushed metal finishUniform fine linear brushing visible on exposed faces producing a satin, slightly directional reflection across the leg and mounting plate.
2 regions
x 0.06 · y 0.20 · w 0.78 · h 0.44 (high); x 0.56 · y 0.02 · w 0.36 · h 0.28 (high) - L-shaped mounting plateFlat L-shaped top plate with rounded corners welded or formed to the top of the rectangular shaft, visible at the upper right of the image.
1 region
x 0.56 · y 0.02 · w 0.36 · h 0.28 (high) - Threaded rodCylindrical threaded rod running inside the cutout parallel to the shaft, showing clear helical threads and producing a darker linear element inside the leg.
1 region
x 0.40 · y 0.36 · w 0.18 · h 0.28 (high) - Knurled adjustment screwCircular knurled screw head with textured diamond knurl visible through the cutout; screw head face has a small central square or hex recess.
1 region
x 0.43 · y 0.46 · w 0.12 · h 0.12 (high) - Brand stencilSingle-line stencil text printed on the outer face of the shaft reading the product brand.
1 region
x 0.12 · y 0.52 · w 0.26 · h 0.12 (high) - Slight shadowing and reflected highlightsSoft shadows and reflections from studio lighting appear along the inner surfaces of the cutout and on the shaft edges, producing a subtle gradient of light to dark on metal surfaces.
1 region
x 0.06 · y 0.20 · w 0.78 · h 0.60 (high) - Leg end geometryVisible lower portion of the shaft tapers slightly into the image and ends out of frame at the lower left, indicating the photographed section is a middle-to-upper detail rather than full-length.Partial
1 region
x 0.06 · y 0.66 · w 0.60 · h 0.34 (medium) - Printed brand text“TIPTOE”
1 region
x 0.14 · y 0.52 · w 0.22 · h 0.10 (high)
Other
Studio-style close-up photograph with a neutral beige backdrop, soft directional lighting, and shallow depth of field; no packaging or props visible.
- Shot compositionDiagonal close-up crop of the leg occupying most of the frame from lower left to upper right, photographed at an oblique angle to emphasize the cutout and hardware.
- BackgroundSmooth neutral beige background with subtle gradient and no texture or additional objects.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Lighting and shadowSoft studio lighting from upper left producing gentle highlights on metal edges and faint soft shadows below and to the right of the leg.
Colors
brushed silver· shaft and mounting plate#DBD4CAdark gunmetal· threaded rod#4C4C4Bsteel gray· knurled screw head#6C6B6B- Rectangular shaftLong hollow rectangular steel leg with rounded outer edges and a long narrow rectangular cutout along one face revealing interior components.