50 L Roamer Pro Split Backpack

Durable 50L travel backpack made from recycled polyester canvas with split design for optimal organization.

Split design folds flat into two compartments, adjustable padded shoulder straps, chest strap with buckle, practical front straps, inner pockets, and grab handles.

Material

Strong recycled polyester canvas

Style

modern, travel-friendly, sustainable

Occasion

travel, vacation, everyday

Gender

unisex

Age Group

adult

Condition

new

Dimensions

13x11.5x20 in

Category

Luggage & Bags > Backpacks

01

Product

Rear-facing view of a rectangular, padded black backpack back panel showing two vertical webbing straps, a central narrow padded panel, and top and bottom carry loops. The surface is matte and slightly textured with visible stitched seams.

• Overall shapeTall rectangular vertical back panel with slightly rounded top and bottom edges and visible padding causing mild horizontal creases.
  1 region

  x 0.08 · y 0.05 · w 0.84 · h 0.90 (high)
• Vertical webbing strapsTwo wide black woven webbing straps run vertically near the left and right thirds of the panel, each stitched to the surface with rectangular stitch patterns at intervals.
  2 regions

  x 0.16 · y 0.12 · w 0.13 · h 0.76 (high); x 0.71 · y 0.12 · w 0.13 · h 0.76 (high)
• Central padded panelA narrower central padded column sits between the webbing straps; its top and bottom edges align with the main panel and it appears slightly recessed compared with the outer panels.
  1 region

  x 0.42 · y 0.12 · w 0.16 · h 0.76 (high)
• Top carry loopsTwo short fabric carry loops are visible at the top edge aligned with the vertical straps; loops are made of the same woven webbing material.
  2 regions

  x 0.22 · y 0.01 · w 0.12 · h 0.10 (medium); x 0.66 · y 0.01 · w 0.12 · h 0.10 (medium)
• Bottom loopA short webbing loop is stitched at the bottom center edge of the panel.
  1 region

  x 0.46 · y 0.88 · w 0.08 · h 0.08 (medium)
• Surface materialSmooth matte synthetic fabric with a subtle sheen and faint horizontal compression lines from padding.

Other

Studio product shot on a light gray seamless background with soft frontal lighting and minimal shadow directly beneath the product. Image is centered and vertically oriented.

• Background and lightingUniform light gray studio background with soft diffuse lighting producing even illumination and a subtle shadow directly below the product.
• Shot compositionBack panel centered in frame, image cropped with small margins left and right and slightly larger top and bottom margins.

Colors

matte black· main fabric panels#22211Edeep black· webbing straps and loops#272624

02

Product

Rear-facing view of a tall rectangular black backpack showing padded twin shoulder straps, top carry handles, vertical central zip, buckles and horizontal reflective slits with small printed text near the lower left side.

• Overall shapeTall rectangular box-shaped backpack with a squared top and vertical side panels visible; the rear-facing side shows two recessed padded back panels separated by a central zip channel.
• Shoulder strapsTwo padded shoulder straps in black with a rounded outer profile, sewn edge binding, adjustable webbing tails and plastic ladder buckles near the top attachments.
  1 region

  x 0.48 · y 0.16 · w 0.40 · h 0.66 (high)
• Top carry handlesPair of short stitched carry handles on the top panel formed from flat webbing, sitting side by side across the top seam.
  1 region

  x 0.34 · y 0.02 · w 0.32 · h 0.12 (high)
• Central zipper and pullVertical central zipper between the two padded back panels with visible metal or dark plastic zipper pull and an attached short cord pull tab.
  1 region

  x 0.53 · y 0.12 · w 0.18 · h 0.34 (high)
• Lower adjustable strap and buckleLoose adjustable webbing strap emerging from the backpack base with an end tail lying on the surface and a plastic quick-release style buckle on the strap near the base.
  1 region

  x 0.08 · y 0.80 · w 0.40 · h 0.18 (high)
• Reflective slitsFour short horizontal thin slits or printed lines stacked vertically on the left side panel that appear lighter than the panel and may be reflective or printed accents.
  1 region

  x 0.12 · y 0.54 · w 0.18 · h 0.20 (high)
• Lower left printed text“Small printed markings located near the lower left panel including characters D_b, a small TM mark, and the number 50 below them.”
  1 region

  x 0.12 · y 0.72 · w 0.20 · h 0.18 (medium)
• Exterior materialSmooth matte fabric on the exterior panels with a slight texture visible and stitched seam lines at panel joins; padding material on the back panels appears covered in a softer, slightly fuzzed fabric.
• Top-side ladder bucklesRectangular plastic ladder-style buckles anchoring the top strap ends on each shoulder strap, visible on the upper rear corners.
  1 region

  x 0.62 · y 0.12 · w 0.20 · h 0.18 (high)
• Small trademark mark“The characters TM printed immediately after the D_b marking.”
  1 region

  x 0.19 · y 0.80 · w 0.04 · h 0.04 (medium)
• Number 50“The number 50 printed below the D_b marking on the lower left panel.”
  1 region

  x 0.12 · y 0.86 · w 0.12 · h 0.08 (medium)

Other

Studio product shot with even front lighting, soft shadow under the bag and a plain light grey background; image is slightly tilted showing three-quarter rear angle.

• Shot compositionThree-quarter rear view with the backpack placed on a flat surface and photographed against a neutral light grey background.
• Lighting and shadowSoft, diffuse studio lighting producing minimal specular highlights and a faint soft shadow beneath and to the right of the backpack.
• BackgroundUniform light grey background with no visible props or packaging elements.

Colors

matte black· left exterior panel#141313soft black· padded back panels and straps#0E0D0Cmatte black plastic· hardware and buckles#1C1B1B

03

Product

Interior of a backpack opened flat showing dual mesh divider panels with zip closures, visible internal pockets, a padded grey interior base, and exterior lower shell in a dark material.

• Opened clamshell layoutBackpack is opened flat in a clamshell configuration exposing the main compartment and both inside faces of the lid and base.
  1 region

  x 0.03 · y 0.04 · w 0.94 · h 0.92 (high)
• Mesh divider panelsTwo large light-colored mesh divider panels occupy most of the visible lid and inner compartment faces; the mesh is fine-knit and semi-transparent.
  1 region

  x 0.10 · y 0.08 · w 0.82 · h 0.62 (high)
• Internal zippered pocketA small zippered pocket with a black zipper and fabric backing is visible in the upper interior near the top edge behind the mesh panel.
  1 region

  x 0.20 · y 0.03 · w 0.40 · h 0.16 (high)
• Zipper hardware and pull tabsMultiple zippers with metal sliders and fabric pull tabs are visible along the mesh panels and compartment edges; pulls include small fabric loops in light colors and darker trim.
  2 regions

  x 0.02 · y 0.44 · w 0.36 · h 0.34 (high); x 0.64 · y 0.30 · w 0.34 · h 0.28 (high)
• Padded interior baseThe bottom interior of the bag shows a smooth padded lining in a mid-grey fabric sitting below the mesh divider.
  1 region

  x 0.08 · y 0.62 · w 0.64 · h 0.30 (high)
• Exterior lower shellVisible lower exterior shell of the backpack is a dark, nearly black fabric with a matte finish; a short webbing loop strap protrudes from the lower edge.
  1 region

  x 0.05 · y 0.78 · w 0.90 · h 0.20 (high)
• Light fabric grab strapA light-colored woven grab strap or reinforcement is visible running near the center fold between the two mesh panels.
  1 region

  x 0.40 · y 0.30 · w 0.28 · h 0.10 (high)
• Edge piping and seamInterior panel edges are finished with a narrow light-colored piping and stitched seams where the mesh meets the lining and zippers.
  1 region

  x 0.06 · y 0.40 · w 0.88 · h 0.30 (high)

Other

Studio shot with neutral light grey background, soft diffuse lighting, minimal shadows, and the product cropped to show interior detail.

• Shot compositionClose-up studio photograph focused on the opened interior of the backpack with uniform framing that crops the product edges.
• Background and surfacePlain light grey background and surface with no visible props, creating neutral contrast with the product.
• Lighting and shadowsSoft, even lighting with subtle shadows under the lower exterior shell and along folds, indicating diffuse studio illumination.
• Image cropEdges of the backpack are cropped at the top-left and bottom-right corners of the frame.

Colors

light grey· mesh divider panels#CBC4C4mid grey· interior lining and padded base#948D8Adark charcoal· exterior lower shell#141313light beige· small grab strap and trim#CAC5C4