Monogram Leather Travel Case

Genuine leather monogram travel case with top zip closure, side carry handle, and interior mesh pocket.

Top zip closure; side carry handle; small interior mesh patch pocket; metallic logo accent; signature dust bag included.

Material

Genuine leather; recycled polyester lining

Secondary

recycled-polyester

Style

minimal, classic, modern

Occasion

travel, vacation, business-casual

Gender

male

Age Group

adult

Condition

new

Dimensions

24x11.5x16.5 cm

Category

Luggage & Bags > Cosmetic & Toiletry Bags

01

Product

Front-facing rectangular toiletry/travel case with a textured upper panel, smoother lower panel, a fabric side loop, and visible metal zipper pulls; small metallic 'BOSS' wordmark centered on the front face.

• Overall shapeRectangular box-shaped case with slightly rounded bottom corners and a flat top surface, shown front-facing and centered in the frame.
  1 region

  x 0.08 · y 0.45 · w 0.84 · h 0.36 (high)
• Front panel textureUpper front panel has a dense small-scale repeated textured or monogram pattern creating a subtly raised dot grid appearance across the top two thirds of the visible face.
  1 region

  x 0.12 · y 0.46 · w 0.76 · h 0.20 (high)
• Lower panel finishLower front panel is a smoother, matte leather-like surface separated from the textured upper panel by a stitched seam that runs horizontally across the face.
  1 region

  x 0.12 · y 0.62 · w 0.76 · h 0.16 (high)
• Stitched seam detailVisible stitched seam along the join between textured upper panel and smooth lower panel, running left to right near the lower third of the front face.
  1 region

  x 0.12 · y 0.60 · w 0.76 · h 0.04 (high)
• Side fabric loopShort fabric carrying loop attached to the left side of the case, forming a folded strap protruding from the side seam.
  1 region

  x 0.04 · y 0.60 · w 0.12 · h 0.12 (high)
• Zipper pullsTwo metal zipper pulls visible on the left side near the fabric loop and a zipped seam along the right edge, with polished metal finish and short tab shapes.
  2 regions

  x 0.04 · y 0.64 · w 0.06 · h 0.08 (medium); x 0.88 · y 0.55 · w 0.08 · h 0.22 (medium)
• Front wordmark“BOSS”
  1 region

  x 0.48 · y 0.52 · w 0.08 · h 0.06 (high)

Other

Studio product shot with a neutral light gray background, soft shadow beneath the case, even diffuse lighting and the case centered horizontally near the lower half of the image.

• Background and lightingUniform light gray background with soft, even lighting that produces a faint shadow directly under the case toward the front.
• Shot compositionCase is centered horizontally and positioned near the lower half of the frame with generous empty space above.
• ShadowSoft diffuse shadow under the case extending slightly forward and to the right, indicating top-front lighting.
  1 region

  x 0.18 · y 0.78 · w 0.64 · h 0.06 (medium)

Colors

textured black· textured upper panelmatte black· smooth lower panelmetallic silver· front wordmarkpolished silver· zipper pulls

02

Product

Close-up side/three-quarter view of a rectangular black travel case with a fine textured pattern on the main panels, a visible metal zipper with rectangular pull at the right, and a horizontal fabric carrying loop anchored to the right side.

• Main panel textureLarge front/side panel covered in a dense repeating raised diamond or crosshatch texture with a slight sheen; texture covers most of the visible upper and left surfaces.
  1 region

  x 0.02 · y 0.08 · w 0.77 · h 0.64 (high)
• Smooth trim and baseLower edges and small side panel below the fabric loop are smooth matte leather or leather-like material without the raised texture.
  1 region

  x 0.50 · y 0.60 · w 0.44 · h 0.30 (high)
• Zipper constructionExposed metal zipper teeth run along the top edge toward the right side; teeth are metallic and continuous in a single line visible from top to front corner.
  1 region

  x 0.68 · y 0.14 · w 0.20 · h 0.64 (high)
• Zipper pullRectangular polished metal zipper pull with a narrow vertical shape hanging at the right edge; surface shows a small area of engraved or stamped characters that are not legible at this scale.Partial
  1 region

  x 0.83 · y 0.58 · w 0.08 · h 0.20 (medium)
• Fabric carrying loopHorizontal grosgrain-like fabric loop attached to the right side, folded over and stitched to form a short handle band visible on the side face.
  1 region

  x 0.70 · y 0.56 · w 0.28 · h 0.20 (high)
• Edge pipingRounded piping runs along the front edge and base seam, forming a smooth border between textured panel and base.
  1 region

  x 0.06 · y 0.66 · w 0.88 · h 0.28 (medium)

Other

Studio product photograph showing a cropped close-up of the case on a light neutral background with soft shadow beneath; three-quarter side angle emphasizing right-side hardware and loop.

• Shot compositionClose-up three-quarter side view tightly cropped so the leftmost front panel and the right-side zipper and handle are visible; top of the product is slightly out of frame on the left.
• Background and lightingEven neutral light gray background with soft studio shadow under the case indicating directional lighting from above-left; no props or packaging visible.
• Image qualityHigh-resolution, well-focused image with visible fine surface texture detail and minimal noise.

Colors

textured black· textured main panelmatte black· smooth base and side trimpolished silver· metal hardware (zipper teeth and pull)

03

Product

Close-up of a rectangular travel case showing textured black exterior, a partially open silver-toothed zipper, visible interior mesh pocket and an interior label reading 'REGENERATED LEATHER', and a short fabric carry strap at the right edge.

• Exterior textureExterior surface shows a densely repeated small square/diamond embossed texture across the visible faces, producing a slightly glossy, pebbled appearance.
  1 region

  x 0.02 · y 0.30 · w 0.81 · h 0.63 (high)
• Main zipperMetal coil zipper with closely spaced silver-toned teeth runs along the top opening; the zipper is partially open exposing the interior.
  1 region

  x 0.06 · y 0.05 · w 0.88 · h 0.22 (high)
• Interior mesh pocketBlack mesh pocket inside the case is visible through the open zipper, with a hexagonal/diamond mesh pattern.
  1 region

  x 0.14 · y 0.14 · w 0.46 · h 0.22 (high)
• Interior label text“REGENERATED LEATHER”
  1 region

  x 0.58 · y 0.21 · w 0.18 · h 0.08 (medium)
• Edge piping and stitchingRounded piping runs along the visible corner and edges with visible stitching where panels meet; piping is covered in the same textured material as the exterior.
  1 region

  x 0.66 · y 0.58 · w 0.33 · h 0.40 (high)
• Carry strapA short black woven fabric carry strap is attached at the right side and is visible emerging from the side seam.
  1 region

  x 0.84 · y 0.70 · w 0.15 · h 0.24 (high)

Other

Studio close-up shot showing top-front quarter of the case; neutral light gray background and soft shadow under the product emphasize texture and shape.

• Shot compositionTight angled close-up framing the top and front faces of the case with the zipper running diagonally across the image.
• Background and lightingEven studio lighting on a smooth light gray background; soft shadow visible beneath the case toward the lower left.
• Image qualityHigh-resolution detail visible in texture and stitching; no people or props present.

Colors

textured black· exterior bodymetallic silver· zipper teethmatte black· interior mesh and lining