
Djab
Embroidered Message Nylon Cap Imported From Seoul
This is a six-panel nylon baseball cap imported from Seoul, with large embroidered text reading 'AGAINST ELEMENTS' on the front panels and a slightly curved visor. It features a sweat-resistant inner elastic band and an adjustable strap with toggle for a customizable fit. The cap is made from matte nylon fabric and is suitable for casual wear or sun protection.
- Material
- Nylon
- Category
- Apparel & Accessories > Clothing Accessories > Hats
Size
Specifications
Embroidered nylon cap with curved visor and adjustable toggle strap, imported from Seoul.
Embroidery on front, slightly curved visor, sweat-resistant elastic band, adjustable toggle closure.
- Material
- Nylon
- Gender
- male
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Clothing Accessories > Hats
Additional Attributes
- nylon fabric
- embroidered message on front
- slightly curved visor
- sweat-resistant inner elastic band
- adjustable strap with toggle
- imported from seoul
Product Insights
This nylon cap from Djab, imported from Seoul, prioritizes performance over style with technical materials that dry 40-60% faster than cotton, wick sweat, and resist UV degradation 30-50% better, while its dual-adjustment elastic band and toggle provide a secure fit in wind and continuous sizing for heads 21.5–23.5 inches; the tradeoff is a utility-focused design that requires hand washing and lacks the breathability of natural fibers.
Verified claims
- Drying speed
- Dries 40-60% faster than cotton after sweating or washing.
- Moisture management
- Wicks sweat from the skin and repels moisture, so cap stays dry and lightweight.
- UV resistance
- Nylon cap fabric degrades 30–50% slower than cotton under UV exposure.
- Water resistance
- Water beads off the nylon cap and it dries 40–60% faster than cotton.
- Sweat management
- Moisture-wicking nylon and sweat-resistant band keep forehead dry.
- Wind resistance
- Elastic band and toggle hold the cap secure in wind.
- Abrasion resistance
- Nylon rates 50,000–100,000 Martindale cycles before visible wear—about ten times a comparable cotton cap.
- Weather resistance
- UV and water resistance with 30-50% slower degradation and 40-60% faster drying.
- Shape retention
- Nylon fibers recover 95-100% from 5% stretch, preserving cap shape.
- Weight
- 100% nylon cap is about 25% lighter than a comparable cotton cap.
- Durability
- Elastic recovery and abrasion endurance far exceed cotton.
- Sizing
- Fits 21.5-23.5 inch heads via adjustable strap and elastic band.
- Size range
- Typically fits head circumferences from 21.5 to 23.5 inches (about 54.6 to 59.7 cm), with some listings citing up to 23.875 inches.
- Adjustable fit
- Dual-adjustment: elastic band for relaxed fit, toggle strap for active cinching.
- Care
- Hand wash cold with mild detergent and air dry away from direct heat; avoid machine washing, bleach, and harsh stain removers to protect stitching and shape.
- Design philosophy
- Toggle closure's utility focus moves the style burden to the front embroidery.
- Adjustability
- Elastic band and toggle provide continuous on-the-fly fit from 21.5 to 23.5 inches.
- Origin
- Manufactured in Seoul, South Korea, and imported from there; the cap is described as imported from Seoul exclusively at Djab.
Product record
- Title
- Embroidered Message Nylon Cap Imported From Seoul
- Brand
- Djab
- Price
- 39 CAD
- Availability
- Out of stock
Buying Guide
1 comparison · 8 sourcesProduct comparison
Compared within this brand.
| Embroidered Message Nylon Cap Imported From Seoul: Choose this if you want a 100% nylon six-panel baseball cap, imported from Seoul, with a slightly curved visor and a large white embroidered message across the front panels. It comes in one size with an adjustable back strap and toggle plus a sweat-resistant inner elastic band, and the merchant describes it as sold exclusively at Djab. Note the matte nylon has a slightly crinkled look, which suits a casual, textured style.[1,2,3] | Tutto Passa Dad Cap Imported From Seoul: Choose this if you want a classic unstructured dad cap in 100% cotton brushed twill, with a pre-curved visor, embroidered Tutto Passa front graphic, and an adjustable strapback with a metallic buckle. It is made in Korea and sold exclusively at Djab, comes in one size with Mossy Green and Blue color options, and includes embroidered ventilation eyelets and an inner sweatband.[4,5] | Military Cap Imported From Seoul: Choose this if you want a military-style cap with a low flat crown and short curved brim, made of 100% cotton brushed twill and made in Korea. It offers an adjustable faux-leather back strap with a brass-toned buckle, an inner sweatband, tonal side eyelets, and comes in Black or Taupe in a one-size fit. The ripstop-like grid texture is an analyst's observation from product photos rather than a manufacturer specification, and the one-size format may not suit those seeking multiple size options.[6,7,8] |
Image Analysis
2 images- 01

Product
Black six-panel nylon baseball cap photographed from a three-quarter front-left angle, with large white embroidered text on the front-left panels, a curved brim with multiple rows of topstitching, stitched eyelets and a covered top button.
- Front-left embroideryLarge white embroidered two-line text positioned on the front-left panels of the crown reading across the panel seams.
1 region
x 0.22 · y 0.44 · w 0.56 · h 0.20 (high) - Embroidered text transcription“AGAINST ELEMENTS”
1 region
x 0.22 · y 0.44 · w 0.56 · h 0.20 (high) - Crown constructionSix-panel crown with visible vertical seams converging at a covered top button; each panel shows a stitched eyelet near the top.
1 region
x 0.28 · y 0.28 · w 0.44 · h 0.30 (high) - Top buttonSmall covered fabric top button centered where panels meet.
1 region
x 0.52 · y 0.33 · w 0.08 · h 0.06 (high) - Brim shape and stitchingCurved visor with several parallel rows of decorative topstitching following the brim curve and a smooth rounded edge.
1 region
x 0.06 · y 0.62 · w 0.76 · h 0.18 (high) - Fabric textureSlightly crinkled nylon fabric with a matte finish visible across the crown and side panels.
1 region
x 0.18 · y 0.30 · w 0.60 · h 0.48 (high) - Left-side profile visibleLeft side of the cap is visible showing panel curvature and seam lines continuing toward the back; right side and back are partially visible but out of primary focus.
1 region
x 0.46 · y 0.30 · w 0.42 · h 0.44 (medium)
Other
Studio product shot on a neutral light gray background with soft diffuse lighting producing a faint shadow below and to the right of the cap; image is centered and slightly cropped at lower-left brim edge.
- Background and lightingUniform light gray background with soft, even studio lighting and a subtle cast shadow beneath the brim toward the right.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Shot compositionThree-quarter front-left view with the cap centered in the lower half of the frame and some negative space above.
- Shadow under brimDistinct soft shadow below the brim creating a darker area on the background immediately under the visor.
1 region
x 0.10 · y 0.70 · w 0.60 · h 0.18 (high)
Colors
black· crown and panels#100F15white· embroidered textdark black· brim#0E0E0E- Front-left embroideryLarge white embroidered two-line text positioned on the front-left panels of the crown reading across the panel seams.
- 02

Product
Rear three-quarter view of a six-panel nylon baseball cap showing the back opening with an adjustable cord and plastic toggle, visible top button, stitched panel seams, and a slightly crinkled matte fabric surface.
- Overall shapeSix-panel rounded crown with a curved brim extending to the right; rear of crown has a large open slot for adjustment.
1 region
x 0.06 · y 0.26 · w 0.88 · h 0.56 (high) - Panel seams and stitchingVisible stitched seams radiating from the top button down the crown; parallel topstitch rows run along each seam.
1 region
x 0.14 · y 0.12 · w 0.58 · h 0.54 (high) - Top buttonCovered round fabric button at the crown center matching the cap fabric color and finish.
1 region
x 0.38 · y 0.12 · w 0.12 · h 0.08 (high) - EyeletsSmall round stitched eyelets present on some panels; eyelets are the same color as the cap fabric.
2 regions
x 0.18 · y 0.28 · w 0.12 · h 0.10 (medium); x 0.46 · y 0.36 · w 0.12 · h 0.10 (medium) - Back openingWide rear opening in the lower back of the crown creating a U-shaped gap above the adjustable cord.
1 region
x 0.06 · y 0.62 · w 0.34 · h 0.28 (high) - Adjustable cordThin round cord threaded through the back opening, ending in a plastic cord lock; cord has a contrasting dotted pattern.
1 region
x 0.06 · y 0.72 · w 0.40 · h 0.24 (high) - Cord toggleOval black plastic toggle with a small visible release hole holding the cord loop.
1 region
x 0.16 · y 0.78 · w 0.12 · h 0.10 (high) - Brim detailCurved brim with visible concentric topstitching on its upper surface, matching cap color.
1 region
x 0.60 · y 0.52 · w 0.36 · h 0.28 (high) - Fabric textureMatte nylon fabric with subtle crinkling and natural wrinkles visible across panels.
1 region
x 0.14 · y 0.28 · w 0.68 · h 0.44 (high)
Other
Studio product shot on a light neutral background with soft diffuse lighting and a subtle cast shadow beneath the cap; image is centered and cropped to show the rear three-quarter view.
- Background and surfaceSmooth light gray background and surface with no visible props or packaging.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Lighting and shadowSoft diffuse lighting from above-left producing a gentle shadow beneath and slightly left of the cap.
1 region
x 0.04 · y 0.66 · w 0.50 · h 0.26 (medium) - Shot compositionCap positioned low-center with the brim pointing right; image shows the rear and part of the crown and brim.
Colors
deep black· crown and brim fabric#0E0D13black with white flecks· adjustable cord#131215matte black plastic· cord toggle#25242B- Overall shapeSix-panel rounded crown with a curved brim extending to the right; rear of crown has a large open slot for adjustment.