Herringbone Knit Driver Cap

Luxurious herringbone knit driver cap in water-resistant wool with fleece lining and ear flaps.

Water-resistant and breathable 100% wool knit, soft polar fleece lining, ear flaps, reinforced inner headband, made in Belgium.

Material

100% wool knit with soft polar fleece lining

Style

classic, heritage, casual

Occasion

everyday, casual, travel, weekend

Gender

male

Age Group

adult

Condition

new

Category

Apparel & Accessories > Clothing Accessories > Hats

01

Product

A low-profile driver/flat cap in a two-tone herringbone knit fabric, shown from a three-quarter front-right angle. Short stitched brim visible and a small metal emblem on the right side of the cap.

• Overall shapeLow-profile driver/flat cap silhouette with a slightly rounded, elongated oval crown that slopes down toward a short front brim.
  1 region

  x 0.07 · y 0.33 · w 0.86 · h 0.45 (high)
• Fabric patternDense diagonal herringbone knit pattern made of alternating dark and light yarns producing a chevron effect across the crown and brim.
  1 region

  x 0.12 · y 0.36 · w 0.76 · h 0.40 (high)
• Brim constructionShort, slightly curved stitched brim that is integrated under the front of the crown and appears padded or reinforced to hold shape.
  1 region

  x 0.10 · y 0.63 · w 0.79 · h 0.12 (high)
• Seam detailVisible seam line where panels meet along the right side of the crown, following the curve from front toward the back.
  1 region

  x 0.58 · y 0.44 · w 0.32 · h 0.30 (medium)
• Metal emblemSmall silver-toned metal emblem attached to the lower right side of the crown near the brim; emblem is raised and reflective.
  1 region

  x 0.78 · y 0.57 · w 0.05 · h 0.07 (high)

Other

Studio product photograph on a light neutral gray background with soft shadow underneath. Three-quarter front-right angle crop with even diffuse lighting.

• BackgroundUniform light gray background filling the frame.
• ShadowSoft diffuse shadow directly beneath and slightly to the right of the cap indicating a light source from above-left.
  1 region

  x 0.18 · y 0.68 · w 0.64 · h 0.12 (medium)
• Shot compositionProduct centered horizontally in lower two-thirds of image, photographed at a low angle to emphasize crown curvature and front brim.

Colors

charcoal gray· crown and brim knitlight gray· crown and brim knitsilver· small metal emblem

02

Product

Side/rear three-quarter view of a low-profile driver cap with a herringbone knit pattern in dark and light grey tones. Visible seam lines follow panel construction and the cap sits on a flat surface with a soft shadow beneath.

• SilhouetteLow-profile flat-topped driver cap silhouette shown from a right-side three-quarter rear angle; crown slopes gently toward a narrow front brim that is mostly out of frame.
  1 region

  x 0.03 · y 0.30 · w 0.94 · h 0.54 (high)
• Panel constructionVisible vertical and curved seams divide the cap into multiple fabric panels; a prominent vertical seam runs near the left third of the visible crown.
  1 region

  x 0.08 · y 0.33 · w 0.50 · h 0.48 (high)
• Surface textureWoven herringbone knit texture composed of alternating diagonal lines creating a chevron pattern across the fabric surface.
  1 region

  x 0.10 · y 0.36 · w 0.80 · h 0.44 (high)
• Edge finishLower edge of the cap finished with a narrow folded hem that follows the base contour of the crown.
  1 region

  x 0.06 · y 0.71 · w 0.86 · h 0.14 (high)
• Front brim detailNarrow front brim is partially visible at the far right, appearing rounded and integrated into the crown without a visible separate stitch line in this view.Partial
  1 region

  x 0.78 · y 0.56 · w 0.18 · h 0.16 (medium)

Other

Studio product shot on a plain light grey background with even overhead lighting and a soft shadow beneath the cap; image is sharply focused on the cap.

• BackgroundUniform light grey background filling the frame.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Shadow and surfaceSoft, diffuse shadow directly under the cap indicating studio lighting and a flat support surface.
  1 region

  x 0.06 · y 0.72 · w 0.88 · h 0.18 (high)
• Shot compositionCap centered horizontally and occupying the lower two-thirds of the image, photographed from slightly above and to the right.

Colors

charcoal· main fabric (darker threads)light grey· contrasting threads (lighter flecks)

03

Product

A grey herringbone knit driver cap with a short stiff brim and a fold-down earflap; visible top panel seams and a small metal emblem on the side.

• Overall shapeFlat-crown driver cap with a low, rounded top that slopes forward into a short, slightly curved brim; a detachable or fold-down earflap hangs down from the lower rear side.
  1 region

  x 0.06 · y 0.18 · w 0.88 · h 0.62 (high)
• Brim constructionShort, stiff-looking brim with a thin layered edge and the same knit herringbone covering as the cap body; brim appears slightly upturned at the outer edge.
  1 region

  x 0.06 · y 0.40 · w 0.50 · h 0.20 (high)
• EarflapSingle visible earflap hanging down on the right side of the image, cut in a rounded rectangular shape and covered in the same herringbone knit as the rest of the cap.
  1 region

  x 0.44 · y 0.55 · w 0.38 · h 0.40 (high)
• Seam and panelingVisible top and side panel seams running from crown to rear creating distinct curved panels; stitching follows the cap curvature.
  1 region

  x 0.40 · y 0.20 · w 0.50 · h 0.50 (high)
• Metal emblemSmall metallic emblem affixed to the right-side panel; appears dark metal and roughly oval with a raised motif.
  1 region

  x 0.62 · y 0.42 · w 0.07 · h 0.12 (high)
• Surface patternDistinct two-tone herringbone knit pattern across the entire cap body and brim, showing alternating light and dark yarns in a chevron arrangement.
  1 region

  x 0.06 · y 0.18 · w 0.88 · h 0.62 (high)

Other

Studio product shot on a uniform light grey background with even diffuse lighting and minimal shadows; cap is shown in a right-side profile orientation and centered in frame.

• BackgroundUniform light neutral grey background filling the frame with no visible props or packaging.
• Shot compositionRight-side profile view of the cap, slightly elevated so the brim projects toward the left; product centered horizontally with ample top and side padding.
• Lighting and shadowEven, diffuse studio lighting that produces soft shadows under the brim and earflap but preserves texture detail of the knit.
• Image qualityHigh-resolution, sharply focused image with clear texture detail and no visible motion blur or compression artifacts.

Colors

charcoal heather grey· main body and brimgunmetal· metal emblem