
Y-3
Tone-On-Tone Logo Hoodie
The Y-3 Tone-On-Tone Logo Hoodie is a relaxed-fit pullover constructed from a cotton/recycled polyester jersey with a terry lining. It includes an adjustable drawstring hood, hidden side-seam pockets, ribbed cuffs and hem, and a tone-on-tone heat-bonded Y-3 logo. As a casual sweatshirt, it is suitable for everyday wear as a comfortable mid-layer or outerwear piece.
- Material
- Cotton and recycled polyester blend
- Gender
- male
- Style
- streetwear, casual, minimal
- Category
- Apparel & Accessories > Clothing > Shirts & Tops
Specifications
Y-3 hoodie with minimalist design, sporty flair, and subtle tone-on-tone logo.
Jersey with terry lining, relaxed fit, adjustable hood, hidden pockets, ribbed edging.
- Material
- Cotton and recycled polyester blend
- Secondary
- recycled-polyester
- Style
- streetwear, casual, minimal
- Occasion
- everyday, casual
- Gender
- male
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Clothing > Shirts & Tops
Additional Attributes
- Jersey fabric in cotton and recycled polyester blend
- Terry lining for added comfort
- Relaxed fit
- Adjustable drawstring hood
- Tone-on-tone heat-bonded logo
- Hidden side-seam pockets
- Ribbed edging at cuffs and hem
- Minimalist design with sporty flair
- Y-3 collaboration by Yohji Yamamoto and adidas
- Low-key avant-garde aesthetic
Product Insights
The Y-3 Tone-On-Tone Logo Hoodie is a midweight, anti-logo design that uses a heat-bonded, near-invisible logo and hidden side-seam pockets to create a smooth, unblemished front. Its 80/20 recycled cotton-polyester terry absorbs light, resists sagging and pilling, and reduces carbon emissions by roughly a third. The blend also helps preserve the anti-fit silhouette and allows the hoodie to layer smoothly under a coat or over a tee. There is no official size chart; measurements from similar Y-3 hoodies are approximate and chest varies by style. The recycled polyester cuts energy use by half versus virgin material. Care is required: wash inside out on gentle and air dry to protect the bonded logo.
Verified claims
- Logo subtlety
- Heat-bonded tone-on-tone logo and hidden pockets create a near-invisible branding effect.
- Material
- 80/20 recycled cotton-polyester blend holds shape and cuts carbon emissions by about a third.
- Sizing guide
- No official size chart is published; a similar Y-3 hoodie in size S measured approximately 19" pit-to-pit and 28" length, and a size M measured 24.5" length.
- Durability
- Resists sagging and pilling better than all-cotton terry.
- Environmental impact
- Recycled polyester can cut energy use by up to half and carbon emissions by about a third compared with virgin polyester.
- Visual texture
- Recycled cotton/polyester terry absorbs light, making the logo blend into the fabric.
- Sizing reference
- Measurements from similar Y-3 hoodies are approximate; chest varies by style.
- Silhouette design
- Heat-bonded logo and hidden pockets keep front drape smooth and clean.
- Layering
- Layers comfortably under a coat or over a t-shirt.
- Fabric texture
- Matte, nubby terry face creates a subdued, uniform look.
- Shape retention
- Recycled polyester preserves the anti-fit silhouette against stretching and pilling.
- Timeless design
- The near-invisible logo aligns with the current shift away from logo-driven streetwear toward construction and fabric quality.
- Side-seam pockets
- Hidden side-seam pockets lie flat to preserve the silhouette.
- Ribbed edging
- Ribbed cuffs and hem are low-profile and do not add visual bulk.
- Heat-bonded logo
- Heat-bonded Y-3 logo sits flush with fabric, avoiding puckering.
- Design philosophy
- Barely visible logo and hidden pockets embody Y-3's anti-logo ethos.
- Versatility
- Midweight terry hoodie works as a light outer layer in mild weather or as a layering piece.
- Care
- Wash inside out in cold water on a gentle cycle, air dry flat or hang dry, and avoid high heat from dryers or irons directly on the print to preserve the heat-bonded logo.
Product record
- Title
- Tone-On-Tone Logo Hoodie
- Brand
- Y-3
- Price
- 385 CAD
- Availability
- Out of stock
Image Analysis
3 images- 01

Product
Front view of a light beige/taupe pullover hoodie with a relaxed fit, drawstring hood, ribbed cuffs and hem, and a small tone-on-tone logo on the left chest.
- Overall silhouetteRelaxed-fit pullover hoodie shown from the front with dropped shoulder seams and a straight ribbed hem sitting at the upper hip.
1 region
x 0.12 · y 0.12 · w 0.76 · h 0.74 (high) - Hood and necklineAttached hood with a center front opening, visible inside hood lining, and a pair of fabric drawstrings emerging from the neckline.
1 region
x 0.32 · y 0.02 · w 0.36 · h 0.20 (high) - DrawstringsMatching-color round drawstrings with frayed knotted ends hanging down the chest to about mid-torso.
1 region
x 0.42 · y 0.10 · w 0.20 · h 0.28 (high) - Left-chest logoSmall tone-on-tone raised or printed 'Y-3' logo located on the left chest area, same color as the garment and subtly visible.
1 region
x 0.58 · y 0.26 · w 0.12 · h 0.08 (high) - Sleeves and cuffsLong sleeves with visible dropped shoulder seams and fitted ribbed cuffs; right sleeve is slightly pushed and gathered at the wrist area.
2 regions
x 0.06 · y 0.40 · w 0.36 · h 0.46 (high); x 0.60 · y 0.34 · w 0.34 · h 0.48 (high) - Hem detailRibbed waistband with a slightly gathered appearance and visible seam stitching along the hem.
1 region
x 0.17 · y 0.78 · w 0.66 · h 0.18 (high) - Hand in side openingModel's right hand is inserted into a side opening at hip level on the garment, indicating a hand placement or pocket opening on the wearer's right side.
1 region
x 0.67 · y 0.56 · w 0.25 · h 0.30 (high) - Fabric surfaceSmooth knit fabric with a matte finish and a soft appearance consistent across torso and sleeves.
1 region
x 0.20 · y 0.18 · w 0.60 · h 0.60 (high)
Other
Model shot cropped at mid-thigh and just above the mouth, neutral light gray studio background, even soft lighting with minimal shadows.
- BackgroundPlain light gray studio background with even, diffuse lighting and minimal texture.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Shot compositionCentered frontal crop of a model from above the mouth to mid-thigh showing the hoodie on the upper body; lower body includes black pants as a separate garment.
1 region
x 0.06 · y 0.00 · w 0.88 · h 1.00 (high) - Lighting and shadowSoft, even studio lighting producing gentle shadows under the hood fold and at sleeve creases, with no harsh highlights.
Colors
light taupe· main body and hood#B9AEABmatching taupe· drawstrings and ribbing- Overall silhouetteRelaxed-fit pullover hoodie shown from the front with dropped shoulder seams and a straight ribbed hem sitting at the upper hip.
- 02

Product
Close-up view of a light beige/taupe pullover hoodie worn on a model showing hood, drawstrings with frayed ends, and a small tone-on-tone 'Y3' logo on the left chest.
- Hood shapeDouble-layered hood with a rolled-forward front edge, visible inner hood lining and soft rounded profile.
1 region
x 0.42 · y 0.05 · w 0.50 · h 0.25 (high) - Neckline and throatRaised throat seam where the hood meets the body, forming a slightly gathered collar area beneath the chin.
1 region
x 0.20 · y 0.20 · w 0.48 · h 0.18 (high) - DrawstringsTwo round braided drawcords emerging from the throat with knotted, frayed ends and short exposed fiber tassels.
1 region
x 0.24 · y 0.28 · w 0.28 · h 0.48 (high) - Left-chest logoSmall tone-on-tone 'Y3' mark printed on the left chest, slightly raised or glossy compared with the knit surface.
1 region
x 0.52 · y 0.62 · w 0.08 · h 0.08 (high) - Fabric textureMedium-weight knit with a smooth, slightly pebbled face visible at close range, consistent across the body and hood.
1 region
x 0.10 · y 0.30 · w 0.70 · h 0.60 (medium) - Shoulder seamVisible dropped shoulder seam running across the upper arm with a simple topstitched finish.
1 region
x 0.68 · y 0.48 · w 0.30 · h 0.18 (high) - Chest text“Y3”
1 region
x 0.52 · y 0.62 · w 0.08 · h 0.08 (high)
Other
Studio-style cropped portrait showing the upper torso and partial left profile of a model against a plain light gray background with soft, even lighting and minimal shadows.
- Shot compositionCropped three-quarter close-up from the model's left side showing neck, lower face, upper torso and hood; product centered vertically.
- BackgroundUniform light gray backdrop with no visible props or textures.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (low) - Model partial faceLeft lower face and neck of a model are visible, cropped mid-ear to mid-chest.
1 region
x 0.00 · y 0.00 · w 0.40 · h 0.28 (high) - Lighting and shadowSoft, diffuse lighting from front-left producing gentle shadows under the chin and along the hood fold.
Colors
light taupe· main fabric#BEB9B6pale taupe gloss· logo#BEB9B6- Hood shapeDouble-layered hood with a rolled-forward front edge, visible inner hood lining and soft rounded profile.
- 03

Product
Rear view of a pullover hooded sweatshirt showing the back, hood, drop shoulders, long sleeves with ribbed cuffs, and a ribbed bottom hem in a uniform light beige/taupe color.
- Overall silhouetteLoose, boxy pullover hoodie shown from the back with a relaxed fit and dropped shoulder seams.
1 region
x 0.12 · y 0.08 · w 0.76 · h 0.85 (high) - Hood constructionSingle-layer hood with a center seam visible on the outer surface; hood lies flat against the upper back.
1 region
x 0.25 · y 0.03 · w 0.50 · h 0.28 (high) - Shoulder and sleeve detailDropped shoulder seam running across the upper back; long sleeves with soft folds and slight gathering near the ribbed cuffs.
2 regions
x 0.00 · y 0.15 · w 0.34 · h 0.70 (medium); x 0.66 · y 0.15 · w 0.34 · h 0.70 (medium) - Hem and cuff finishRibbed bottom hem and ribbed sleeve cuffs in the same color and fabric as the body, producing a slightly gathered look at the waist.
3 regions
x 0.12 · y 0.76 · w 0.76 · h 0.18 (high); x 0.06 · y 0.78 · w 0.28 · h 0.18 (medium); x 0.66 · y 0.78 · w 0.28 · h 0.18 (medium) - Fabric appearanceSmooth knit fabric with a soft matte finish and gentle surface texture visible in folds and shadowing.
1 region
x 0.20 · y 0.20 · w 0.60 · h 0.50 (high) - Visible seamsStitching lines visible at the shoulder seams, hood seam, and along the bottom hem.
3 regions
x 0.22 · y 0.10 · w 0.56 · h 0.02 (medium); x 0.26 · y 0.04 · w 0.48 · h 0.08 (medium); x 0.12 · y 0.90 · w 0.76 · h 0.03 (medium)
Other
Model wearing the hoodie photographed from the back against a plain light gray studio background with soft, even lighting and minimal shadows.
- Model and poseMale model shown from the rear with head slightly turned to the left, hands visible at the lower sides; garment worn over dark trousers.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Background and lightingNeutral light gray seamless background with soft, diffuse lighting and subtle shadows beneath the hem and under the hood.
- Image framingVertical crop showing the product from upper back to just below the waist; entire hoodie back is visible with slight cropping at sleeve edges.
Colors
light beige taupe· main fabric#BAB2AD- Overall silhouetteLoose, boxy pullover hoodie shown from the back with a relaxed fit and dropped shoulder seams.
Variants
4 SKUs| SKU | Title | Price | Avail |
|---|---|---|---|
| 4595910 | Tone-On-Tone Logo Hoodie - Small | CA$99.95CA$385.00 | Out of Stock |
| 4595911 | Tone-On-Tone Logo Hoodie - Medium | CA$99.95CA$385.00 | Out of Stock |
| 4595912 | Tone-On-Tone Logo Hoodie - Large | CA$99.95CA$385.00 | Out of Stock |
| 4595913 | Tone-On-Tone Logo Hoodie - X-Large | CA$99.95CA$385.00 | Out of Stock |