Pebbled Faux-Leather Utility Tote Bag

Pebbled recycled faux-leather utility tote with magnetic snap closure, grab/shoulder handles, and interior zip and slip pockets.

Magnetic snap-button closure; grab or shoulder handles; one zipped interior pocket and two slit interior pockets; pebbled recycled faux-leather exterior with recycled polyester lining.

Material

Pebbled recycled faux leather; recycled polyester lining

Secondary

recycled-polyester

Style

minimal, utilitarian, classic

Occasion

everyday, work, travel

Gender

unisex

Age Group

adult

Condition

new

Dimensions

41 x 15 x 33 cm

Category

Luggage & Bags > Shopping Totes

01

Product

Front-facing rectangular tote bag in pebbled black material with two long shoulder straps and visible four-panel stitching on the front.

• Overall silhouetteRectangular tote with a slightly trapezoidal profile (base marginally wider than top) shown upright and centered, flat base resting on surface.
  1 region

  x 0.08 · y 0.28 · w 0.84 · h 0.57 (high)
• Material texturePebbled/grain texture across the exterior surface with a mild glossy sheen reflecting studio light.
  1 region

  x 0.12 · y 0.33 · w 0.76 · h 0.50 (high)
• Front panel constructionFront face is divided into four rectangular panels by a vertical seam down the center and a horizontal seam across the mid-height, forming a visible cross where seams meet near the bag center.
  1 region

  x 0.18 · y 0.36 · w 0.64 · h 0.46 (high)
• Top edge and openingOpen top edge visible as a straight horizontal rim; interior is not visible or shown.
  1 region

  x 0.18 · y 0.28 · w 0.64 · h 0.10 (high)
• Handles attachmentTwo long, thin shoulder straps extend upward from the top edge and are attached via small rectangular stitch tabs on the front face near the top seam.
  3 regions

  x 0.33 · y 0.06 · w 0.34 · h 0.40 (high); x 0.28 · y 0.24 · w 0.16 · h 0.10 (high); x 0.56 · y 0.24 · w 0.16 · h 0.10 (high)
• Edge finishingNarrow piped or folded edge trim follows the bag perimeter and top rim, stitched visible along sides and base.
  1 region

  x 0.08 · y 0.28 · w 0.84 · h 0.57 (high)
• Base and shadowFlat rectangular base with a small cast shadow to the right and slight rounding at front corners where base meets sides.
  1 region

  x 0.12 · y 0.76 · w 0.76 · h 0.16 (high)
• Hardware absenceNo visible metal hardware, clasps, zippers, or external pockets visible on the front face.

Other

Studio product shot on a uniform light gray background with soft, even lighting and a subtle shadow under the bag; image centered and front-facing.

• BackgroundPlain light gray backdrop filling the frame.
• Shot compositionBag is centered in the frame, photographed head-on showing the front face and straps rising toward the top center.
• Lighting and shadowEven studio lighting with a soft shadow cast to the right of the bag base and slight specular highlights on the pebbled surface.
  1 region

  x 0.62 · y 0.78 · w 0.22 · h 0.12 (high)

Colors

black· bodyblack· straps

02

Product

Close-up three-quarter view of a black pebbled faux-leather tote showing the left side panel, front panel, base corner and two top handles with visible stitch attachments.

• Side panel geometryVisible left side panel is rectangular with a slightly folded base corner and an internal seam running along the vertical edge where side meets front.
  1 region

  x 0.03 · y 0.12 · w 0.32 · h 0.78 (high)
• Front panel surfaceFront panel is flat and rectangular with a uniform pebbled texture and a matte low-sheen finish.
  1 region

  x 0.35 · y 0.12 · w 0.62 · h 0.76 (high)
• Handle pairTwo narrow flat top handles made from the same pebbled material attach to the top edge; rectangular stitch reinforcements visible at the attachment points.
  1 region

  x 0.40 · y 0.00 · w 0.35 · h 0.24 (medium)
• Top openingOpen top edge visible with inner lining seen as a dark recessed area along the top.
  1 region

  x 0.36 · y 0.02 · w 0.58 · h 0.12 (medium)
• Edge piping and seamsPiped edges and topstitched seams run along the vertical and base edges; stitching is tonal and closely matches the material color.
  1 region

  x 0.03 · y 0.12 · w 0.94 · h 0.80 (medium)

Other

Studio product shot with neutral light gray background, soft directional lighting and a faint shadow beneath the bag; image is tightly cropped to show the lower two-thirds and left portion of the tote.

• Background and lightingUniform light gray background with soft, even studio lighting creating subtle highlights on the pebbled texture and a soft shadow under the bag.
• Crop and framingImage is cropped to show the left half of the tote from near the top handles down to the base; right edge of the bag extends out of the frame.
• Image qualityHigh-resolution photograph with clear texture detail and accurate focus across the visible surfaces.

Colors

black· body (front and side panels)black· handles

03

Product

Close-up of the tote bag interior showing pebbled black faux-leather exterior and trim, a brown fabric interior lining, a black leather-trimmed zip pocket, a sewn leather internal label, and a black leather snap tab with a round gold snap fastener.

• Pebbled exterior surfaceBlack pebbled faux-leather visible on the bag exterior and on the strap and snap tab; texture shows small rounded grain and a matte to low-sheen finish.
  2 regions

  x 0.02 · y 0.50 · w 0.68 · h 0.48 (high); x 0.70 · y 0.02 · w 0.28 · h 0.50 (medium)
• Top edge and stitchingTop rim of the bag shows a folded leather edge with visible single-line topstitching along the inner rim.
  1 region

  x 0.08 · y 0.02 · w 0.84 · h 0.15 (high)
• Interior liningSmooth brown fabric lining that contrasts with the black exterior, visible across the main interior wall and pocket surround.
  1 region

  x 0.12 · y 0.16 · w 0.76 · h 0.50 (high)
• Snap closure tabBlack pebbled leather tab extending from the rim with a round gold-toned snap fastener attached; snap face has fine stamped characters.
  1 region

  x 0.18 · y 0.12 · w 0.28 · h 0.22 (high)
• Gold snap text“Legible stamped characters around the gold snap face; characters are small but visible on the snap surface.”
  1 region

  x 0.27 · y 0.18 · w 0.06 · h 0.06 (medium)
• Zipper pocketInternal zip pocket with a black zipper and a narrow leather trim tape running horizontally along the interior wall.
  1 region

  x 0.28 · y 0.30 · w 0.54 · h 0.18 (high)
• Leather internal labelSmall black leather patch sewn onto the lining beneath the zip pocket; any embossed text on the patch is too small to read clearly at this scale.Partial
  1 region

  x 0.48 · y 0.44 · w 0.16 · h 0.07 (medium)
• Strap attachment areaInterior view includes one vertical strap running up from the rim into the image top, showing the same pebbled leather and edge stitching as the body.
  1 region

  x 0.72 · y 0.02 · w 0.12 · h 0.45 (high)
• Interior pocket pull tabShort black leather pull tab attached to the zipper slider, visible hanging downward from the zipper area.
  1 region

  x 0.34 · y 0.36 · w 0.06 · h 0.08 (medium)

Other

Studio close-up detail shot focused on the bag interior and rim with soft even lighting, neutral light gray background, and shallow depth of field; image is tightly cropped to the top portion of the bag.

• Shot compositionTight studio close-up framing that crops the bag at the lower exterior corner and at the top of the straps, focusing on interior pocket and snap tab.
• BackgroundSmooth neutral light gray background with no visible props or surface.
• Lighting and shadowSoft, diffuse lighting with subtle highlights on the pebbled leather and gentle shadows inside the bag, yielding clear texture detail and low-contrast interior shading.
• Image croppingLower left and right exterior edges are partially cropped by the frame; top of at least one strap is cut off by the image top edge.

Colors

black· exterior leathertaupe brown· interior liningwarm gold· snap hardware