Smooth Faux-Leather Card Holder

A compact smooth faux-leather card holder with a recycled polyester lining, multiple card and bill slots, and a zip change pocket, designed in Canada as a Simons exclusive.

Multiple slots for cards and bills, zip change pocket, smooth faux-leather exterior, recycled polyester lining, compact 8.5 x 13 cm dimensions.

Material

Faux leather with recycled polyester lining

Secondary

polyester

Style

classic, minimal

Occasion

everyday, work, travel

Gender

unisex

Age Group

adult

Condition

new

Category

Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

01

Product

Front-facing rectangular card holder in smooth dark faux-leather with a top-and-right perimeter zipper and a knotted wrist loop attached at the upper-left corner. Visible single-panel front with edge stitching.

• Overall shapeHorizontal rectangular flat card holder with rounded corners and thin profile shown from the front.
  1 region

  x 0.09 · y 0.57 · w 0.82 · h 0.30 (high)
• Material and surfaceSmooth, matte faux-leather front panel with fine even texture and no visible embossing or grain variation.
  1 region

  x 0.12 · y 0.61 · w 0.76 · h 0.22 (high)
• Perimeter stitchingSingle line of tonal stitching runs close to the edge around the front panel, visible on top, bottom, and sides.
  1 region

  x 0.12 · y 0.59 · w 0.76 · h 0.26 (high)
• Zipper placementExposed metal-toothed zipper follows the top edge and continues down the right edge to provide a top-and-side opening.
  2 regions

  x 0.14 · y 0.52 · w 0.70 · h 0.08 (high); x 0.82 · y 0.57 · w 0.10 · h 0.22 (high)
• Wrist loopRounded faux-leather wrist strap attached at the upper-left corner, formed into a visible knot where it meets the zipper pull area.
  1 region

  x 0.03 · y 0.40 · w 0.29 · h 0.31 (high)
• Zipper pull knot detailMultiple wraps of the strap form a chunky knot at the zipper entry point, sitting on top of the card holder's left top corner.
  1 region

  x 0.08 · y 0.39 · w 0.15 · h 0.12 (high)

Other

Studio product photograph on a uniform light gray background with soft shadow beneath the item; product centered horizontally and placed in the lower half of the frame.

• Shot compositionProduct is centered horizontally and occupies the lower third of the image, photographed straight-on at eye level.
• Background and surfaceEven light gray seamless background and surface with a soft subtle shadow directly under the card holder.
• LightingDiffuse studio lighting producing soft, even illumination and minimal specular highlights on the faux-leather and zipper teeth.

Colors

matte black· front panelblack with light sheen· wrist strap and knotted loopmetallic silver· zipper teeth and slider

02

Product

Rectangular black faux-leather card holder shown face-on with a horizontal zip top, a knotted wrist strap, a left-side zip gusset, a large flat panel on the left face, and multiple vertical card slots on the right face. Visible top zipper hardware is metallic.

• Overall shapeLow-profile horizontal rectangle with slightly rounded corners and a thin profile lying flat, showing the front face and top edge.
  1 region

  x 0.08 · y 0.50 · w 0.84 · h 0.34 (high)
• Left face pocketLarge smooth flat panel on the left half of the front face with visible single-line stitching around its perimeter.
  1 region

  x 0.10 · y 0.54 · w 0.42 · h 0.26 (high)
• Right card slotsVertical stacked card slots on the right side: multiple narrow pockets formed by stitched vertical seams, aligned along the right edge.
  1 region

  x 0.61 · y 0.54 · w 0.27 · h 0.26 (high)
• Top zipper and pullZipper runs along the top edge with visible metal pull hardware located near the right corner, attached to a short loop of leather.
  1 region

  x 0.58 · y 0.36 · w 0.33 · h 0.12 (high)
• Knotted wrist strapShort rounded faux-leather strap looped and tied in a knot close to the zipper pull, resting on top of the zipper area.
  1 region

  x 0.32 · y 0.30 · w 0.40 · h 0.14 (high)
• Left-side zip gussetZipper teeth continue down the left side forming a gusset with visible textured zipper tape along the left vertical edge.
  1 region

  x 0.06 · y 0.48 · w 0.10 · h 0.30 (high)
• Edge stitchingContrasting single-line topstitching visible along the perimeter of the front face and around the card slot divisions.
  1 region

  x 0.08 · y 0.50 · w 0.84 · h 0.34 (high)

Other

Studio product shot on a uniform light gray background with soft frontal lighting and a faint shadow beneath the product. The card holder is centered horizontally and placed in the lower half of the frame.

• BackgroundEven light gray backdrop with no visible texture or props.
• Lighting and shadowSoft, diffuse lighting from the front producing a subtle shadow directly below the product.
• Shot compositionProduct centered horizontally, positioned toward the lower half of the image, photographed straight-on at eye level.

Colors

matte black· main bodyblack· wrist strapbrushed silver· zipper pull and hardware

03

Product

Close-up of a black faux-leather card holder showing exterior face, metal zipper teeth, brown fabric interior lining, and an internal black leather label with embossed text.

• Exterior panelSmooth black faux-leather exterior panel with a satin finish and visible single-line perimeter stitching along the edge.
  1 region

  x 0.00 · y 0.58 · w 1.00 · h 0.42 (high)
• Zipper teeth and tapeExposed metal zipper teeth in a bright silver finish mounted on a black woven zipper tape; teeth run along the top opening and are fully visible.
  1 region

  x 0.05 · y 0.10 · w 0.90 · h 0.18 (high)
• Interior liningBrown woven fabric lining visible inside the main compartment with a row of contrast topstitching along the interior edge.
  1 region

  x 0.18 · y 0.28 · w 0.64 · h 0.28 (high)
• Internal label patchSmall black rectangular leather patch sewn onto the interior, with embossed uppercase lettering that is partially visible.
  1 region

  x 0.36 · y 0.36 · w 0.28 · h 0.15 (high)
• Embossed label text“SIMONS”Partial
  1 region

  x 0.36 · y 0.36 · w 0.28 · h 0.15 (medium)
• Card slot edgeInner curved card slot edge visible at the right side of the opening, showing laminated edge and stitching.
  1 region

  x 0.74 · y 0.38 · w 0.20 · h 0.18 (medium)

Other

Tight diagonal close-up of the product on a light neutral background with soft shadowing; image is well lit and sharply focused on the zipper and interior.

• Shot compositionDiagonal top-down close-up framing that crops the card holder so only the top opening and a portion of the front panel are visible.
• Background and lightingEven, light gray background with soft diffuse lighting and minimal harsh shadows; subtle shadow beneath the product.
• Image qualityHigh resolution, sharp focus on zipper teeth and interior textures; no visible noise or compression artifacts.

Colors

black· exterior panelsilver· zipper teethwarm brown· interior liningblack· internal leather label patch