Mid-Length Soft Nylon Puffer Jacket

A mid-length puffer jacket in soft, matte recycled nylon with lightweight plant-based insulation for warm, wind-resistant wear.

Wind-resistant recycled nylon shell, lightweight Sorona® insulation, Teflon EcoElite™ water-repellent finish, two-way zip with snap-button placket, adjustable hood and hem, and zippered flap pockets.

Material

Recycled nylon shell; Sorona® polyester insulation

Secondary

polyester

Style

casual, utilitarian, modern, minimal, insulated, lightweight, travel-friendly

Occasion

everyday, casual, travel, weekend, running-errands

Gender

female

Age Group

adult

Condition

new

Category

Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

01

Product

Front-facing close-up of a mid-length puffer jacket showing the upper body, hood, and top of sleeves. Matte snap-button placket and horizontal quilted baffles are visible.

• Hood and high collarIntegrated hood with a high padded collar that stands up around the neck; hood edge appears rounded and filled with padding.
  1 region

  x 0.28 · y 0.08 · w 0.44 · h 0.22 (high)
• Center front placket and snapsCenter front placket with a vertical row of round matte snap buttons visible (four snaps shown on the visible area); placket is a separate stitched panel down the front.
  1 region

  x 0.40 · y 0.20 · w 0.20 · h 0.64 (high)
• Horizontal quiltingHorizontal quilted baffles formed by stitched seams across the body and sleeves, creating rectangular padded sections.
  1 region

  x 0.12 · y 0.28 · w 0.76 · h 0.60 (high)
• Side pocket seamVertical seam lines and pocket openings visible at the lower front sides aligning with the quilted panels, suggesting inset hip pockets.
  2 regions

  x 0.12 · y 0.60 · w 0.30 · h 0.20 (medium); x 0.58 · y 0.60 · w 0.30 · h 0.20 (medium)
• Sleeve constructionSet-in long sleeves with the same horizontal quilting; sleeve on the viewer's left shows continuous baffles and smooth cuff area.
  1 region

  x 0.00 · y 0.34 · w 0.25 · h 0.50 (high)
• Fabric finishSmooth, low-sheen woven outer fabric consistent across hood, body, and sleeves; surface appears matte rather than glossy.

Other

Studio portrait crop showing a model wearing the jacket against a plain light gray background with soft, even lighting and minimal shadowing. Model head and shoulders are visible; a single metallic hoop earring is visible on the model's left ear.

• Model and framingImage is a cropped studio portrait showing the model from head to mid-torso wearing the jacket; face and hair are visible above the collar.
  1 region

  x 0.14 · y 0.00 · w 0.72 · h 0.34 (high)
• Background and lightingPlain neutral light gray background with soft, even studio lighting that minimizes strong shadows and highlights.
• Visible accessorySingle thick metallic hoop earring visible on the model's left ear.
  1 region

  x 0.62 · y 0.09 · w 0.08 · h 0.12 (high)
• Image cropJacket lower hem is out of frame; image focuses on upper portion including hood, collar, chest, and upper sleeves.

Colors

matte black· outer shellblue and white stripe· visible inner neckline trim

02

Product

Front view of a mid-length black quilted puffer jacket with attached hood, front snap placket over a zipper, horizontal baffles, and hands-in-side pockets.

• Overall silhouetteMid-length straight silhouette falling to just above the knees with long sleeves and an attached hood.
  1 region

  x 0.18 · y 0.10 · w 0.64 · h 0.65 (high)
• Quilting patternHorizontal quilted baffles running across the body and sleeves, evenly spaced.
  1 region

  x 0.20 · y 0.18 · w 0.60 · h 0.46 (high)
• Hood constructionAttached hood with visible seam lines and a slightly raised collar area where the hood connects to the body.
  1 region

  x 0.28 · y 0.08 · w 0.44 · h 0.16 (high)
• Front closureCentral front zipper covered by a snap-button placket; several round snap heads visible along the placket.
  1 region

  x 0.36 · y 0.20 · w 0.28 · h 0.56 (high)
• PocketsHand-in side pockets positioned at hip level; model has hands inserted into pockets.
  2 regions

  x 0.20 · y 0.36 · w 0.20 · h 0.18 (high); x 0.60 · y 0.36 · w 0.18 · h 0.18 (high)
• Fabric finishMatte to low-sheen woven outer fabric appearing smooth with minimal surface texture.
  1 region

  x 0.24 · y 0.18 · w 0.52 · h 0.50 (medium)
• Sleeve detailLong set-in sleeves with horizontal quilting continuing across them; cuffs are not visibly elasticated or ribbed.
  1 region

  x 0.18 · y 0.24 · w 0.64 · h 0.36 (high)

Other

Studio full-body shot of a model wearing the jacket against a neutral light gray gradient background with soft, even lighting and a faint shadow on the floor.

• Model poseStanding full-body pose with head tilted slightly back and hands in jacket pockets; full shoes visible.
  1 region

  x 0.10 · y 0.02 · w 0.80 · h 0.96 (high)
• Background and lightingNeutral light gray gradient background with soft, even studio lighting and a subtle shadow under the model's feet.
• Image framingFull-length framing showing the product on a model from head to shoes, centered in the frame.

Colors

black· outer shell

03

Product

Rear view of a mid-length quilted puffer jacket with a stitched horizontal baffle pattern and an attached hood; long set-in sleeves with visible ribbed cuff extension and straight hem that falls below the hips.

• Overall silhouetteMid-length puffer jacket shown from the back with a straight hemline falling below the model's hips and a relaxed, slightly boxy fit.
  1 region

  x 0.07 · y 0.08 · w 0.86 · h 0.88 (high)
• Quilted baffle patternHorizontal stitched baffles run across the back and sleeves in evenly spaced wide bands creating the puffer look.
  1 region

  x 0.12 · y 0.20 · w 0.76 · h 0.68 (high)
• Attached hoodLarge attached hood with the same horizontal baffle stitching; hood sits up and covers upper back neckline.
  1 region

  x 0.34 · y 0.06 · w 0.32 · h 0.20 (high)
• Sleeve constructionLong set-in sleeves with horizontal baffles continuous from body to sleeve; sleeves end with a visible ribbed inner cuff extending slightly past the outer shell.
  2 regions

  x 0.10 · y 0.28 · w 0.20 · h 0.58 (high); x 0.70 · y 0.28 · w 0.20 · h 0.58 (high)
• Side seam and pocket areaLower side seam area visible with a slight opening where the model's hands are near the side, suggesting side welt pocket placement though pocket opening is not clearly visible.Partial
  2 regions

  x 0.75 · y 0.72 · w 0.18 · h 0.22 (medium); x 0.06 · y 0.72 · w 0.18 · h 0.22 (medium)
• Shell finishMatte-finish soft nylon shell with a uniform, smooth texture and minimal surface sheen.
  1 region

  x 0.12 · y 0.20 · w 0.76 · h 0.68 (high)
• Visible hardware or logosNo visible logos, brand markings, zippers, or exterior hardware are apparent on the visible rear surface.

Other

Studio product shot showing a model wearing the jacket against a neutral light gray background with soft, even lighting and minimal shadows; image is framed to show the jacket rear and part of the model's head and hands.

• Model and poseModel facing away from camera showing the back of the jacket, head slightly turned to the left so left profile is visible, hands relaxed near sides.
  1 region

  x 0.18 · y 0.02 · w 0.64 · h 0.96 (high)
• BackgroundUniform light gray seamless studio background with no visible props or texture.
• LightingSoft, even studio lighting producing gentle shading on the jacket's baffles and minimal specular highlights.
• Image framingVertical portrait crop centering the jacket; lower legs cropped out and entire back of jacket is visible.

Colors

deep black· shellblack (ribbed cuff)· ribbed inner cuff