Acacia Mid-Length Rubber Raincoat

Mid-length waterproof raincoat with a long, straight silhouette and functional storm-ready detailing.

Waterproof polyester shell, mesh lining, built-in hood, stand-up collar, two-way zip under a snap flap, underarm vents, buttoned back storm flap, buttoned patch pockets, adjustable snap cuffs, and fully sealed seams.

Material

Waterproof polyester fabric with mesh lining

Style

classic, utilitarian, minimal, modern

Occasion

everyday, casual, travel, running-errands

Gender

female

Age Group

adult

Condition

new

Category

Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

01

Product

Front view of a mid-length rubberized hooded raincoat with visible center zipper, snap-placket, long sleeves, and a matte finish; worn by a model and shown slightly open to reveal an inner white top.

• SilhouetteMid-length, straight-cut raincoat that reaches the upper thigh with a slightly flared hem and a relaxed fit over the torso.
  1 region

  x 0.22 · y 0.14 · w 0.56 · h 0.60 (high)
• Material and finishSmooth matte rubberized outer surface with subtle creasing at joints and sleeve folds, indicating a waterproof coated fabric.
  1 region

  x 0.24 · y 0.18 · w 0.52 · h 0.50 (high)
• Hood constructionAttached three-panel hood with a rounded face opening that sits back on the model's shoulders.
  1 region

  x 0.31 · y 0.02 · w 0.38 · h 0.18 (high)
• Front closureFull-length center zipper closure that is partially open; zipper is covered by an outer snap-button placket with visible round snap heads at intervals.
  2 regions

  x 0.45 · y 0.16 · w 0.10 · h 0.54 (high); x 0.33 · y 0.26 · w 0.34 · h 0.42 (medium)
• Sleeve cuffsStraight long sleeves with minimal visible seam at the cuff and a snap-button tab near the wrist on the visible sleeve.
  1 region

  x 0.29 · y 0.28 · w 0.20 · h 0.18 (high)
• Zipper pull detailShort rectangular zipper pull in a bright red color attached to the lower portion of the zipper.
  1 region

  x 0.55 · y 0.52 · w 0.05 · h 0.08 (high)
• Visible interiorCoat is worn open enough to reveal an inner white crew-neck top; interior lining of the coat is not clearly visible.
  1 region

  x 0.38 · y 0.18 · w 0.24 · h 0.18 (high)

Other

Studio full-body shot on a neutral light gray/white background featuring a standing model centered in frame with soft, even lighting and minimal shadows.

• Shot compositionFull-body frontal studio photograph with the model centered and standing, legs visible and feet near the bottom of the frame.
• Background and lightingPlain pale gray to white seamless background with even diffuse lighting producing soft shadows beneath the feet.
• Model presenceFemale model wearing the coat with arms crossed; hair is visible and the face is unobstructed.
  1 region

  x 0.32 · y 0.00 · w 0.36 · h 0.22 (high)

Colors

dark olive brown· coat body#53433Bmetallic silver· zipper teethbright red· zipper pull

02

Product

Front-facing view of a mid-length, matte-finish dark brown rubber raincoat on a model; features a high collar hood, full-length snap-front placket, long set-in sleeves with cuff seam, and an angled flap pocket with a small red logo tag on the wearer's right hip.

• Hood and high collarIntegrated hood with a high stand collar that extends upward to cover the neck; hood sits against the back of the model's head and shoulders with visible seam lines where it attaches to the yoke.
  1 region

  x 0.28 · y 0.04 · w 0.45 · h 0.18 (high)
• Snap-front placketCentered full-length front placket closed with visible round metal or coated snaps spaced down the front; placket creates a clean vertical center line.
  1 region

  x 0.42 · y 0.18 · w 0.16 · h 0.66 (high)
• Curved chest seam detailingDecorative curved seam lines on the chest running from the center toward the shoulder area on both sides, visible as stitched lines in the same color as the coat.
  1 region

  x 0.30 · y 0.18 · w 0.40 · h 0.18 (high)
• Angled flap pocketSingle visible angled flap pocket on the wearer's right hip with a rectangular flap that lies flat against the coat; flap has a rivet or snap at the top corner.
  1 region

  x 0.56 · y 0.48 · w 0.25 · h 0.22 (high)
• Logo tag on pocket“Small vertical red rectangular logo tag sewn onto the pocket flap near its outer edge; tag contains white uppercase text.”Partial
  1 region

  x 0.62 · y 0.55 · w 0.12 · h 0.12 (high)
• Sleeve constructionLong set-in sleeves with a horizontal seam at the cuff area and a smooth matte rubber finish matching the body color.
  2 regions

  x 0.08 · y 0.36 · w 0.25 · h 0.45 (high); x 0.67 · y 0.36 · w 0.25 · h 0.45 (high)
• Material finishSmooth, matte rubber or rubberized material with a slight sheen where light reflects, uniform in color and texture across the visible surface.
• Visible hardware countFive round snaps are visible along the front placket from collar to hem.
  1 region

  x 0.43 · y 0.18 · w 0.14 · h 0.62 (high)
• Pocket tag text transcription“HUNTER”Partial
  1 region

  x 0.62 · y 0.55 · w 0.06 · h 0.10 (medium)

Other

Studio product shot showing a centered model from head to mid-thigh against a plain light background with even soft lighting and minimal shadows.

• Shot compositionCentered vertical crop showing the model from head to mid-thigh; coat is the primary subject and fills the central area of the frame.
• BackgroundPlain light neutral background without texture or props.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Model visibleModel's head, torso, and hands are visible; hands are resting by the sides with rings visible on fingers.
  1 region

  x 0.28 · y 0.02 · w 0.44 · h 0.96 (high)
• Lighting and shadowSoft, even studio lighting with minimal hard shadows; slight soft shadow visible along the left side of the model.

Colors

dark brown· coat bodybright red· pocket logo tagwhite· logo tag text

03

Product

Rear view of a mid-length rubberized raincoat in a dark olive-brown color, showing a hood, rear yoke/vent flap, center back seam, long sleeves with snap-adjust cuffs, rounded hem, and a small red circular logo tab at the left hem.

• Hood shapeThree-panel attached hood with a smooth rounded crown and visible seam lines, sitting relaxed against the upper back.
  1 region

  x 0.33 · y 0.06 · w 0.34 · h 0.18 (high)
• Rear yoke and vent flapHorizontal yoke across the upper back forming a flap that extends from shoulder to shoulder; the flap creates a shallow vent line just below the shoulder seam.
  1 region

  x 0.18 · y 0.22 · w 0.64 · h 0.12 (high)
• Center back seamSingle vertical seam runs down the middle of the back from the yoke to the hem.
  1 region

  x 0.42 · y 0.28 · w 0.16 · h 0.56 (high)
• Sleeve constructionLong set-in sleeves with smooth rubberized finish and seam lines along the outer arm; cuffs have a snap-adjust closure with visible snap heads.
  2 regions

  x 0.06 · y 0.22 · w 0.22 · h 0.56 (high); x 0.72 · y 0.22 · w 0.22 · h 0.56 (high)
• Hem shape and lengthMid-length hem with a slightly rounded back edge extending to cover upper thighs; hem sits below the hips.
  1 region

  x 0.24 · y 0.72 · w 0.52 · h 0.22 (high)
• Material finishSmooth rubberized fabric with a subtle satin sheen and uniform matte appearance across the garment.
• Red logo tabSmall circular red logo or tab sewn at the lower left hem on the back, clearly visible against the coat color.
  1 region

  x 0.44 · y 0.88 · w 0.04 · h 0.04 (high)

Other

Studio product shot showing a model from the rear against a plain light background. Soft even lighting with minimal shadows; model wears dark trousers and is centered in frame.

• Shot compositionCentered rear three-quarter shot of a standing model cropped near mid-thigh, showing the full back of the coat and part of the model's legs and hands.
• Background and lightingEven neutral light gray or off-white background with soft diffuse lighting and minimal cast shadow.
• Visible propsModel is wearing dark blue or black trousers that are partially visible below the coat hem.
  1 region

  x 0.28 · y 0.86 · w 0.44 · h 0.12 (high)

Colors

dark olive brown· main body#453730bright red· logo tab