Frye and Co.
Miranda 14 Tall Boots
The Miranda 14 Tall Boots from Frye and Co. are knee-high, pull-on women's boots made with a distressed faux-leather upper, cushioned faux-leather footbed, and textured rubber outer sole. They feature a stacked faux-leather heel measuring 2 inches (5 cm) and a slip-on silhouette with no laces or zippers. Note that Frye and Co. is a separate line from The Frye Company; these boots use synthetic rather than genuine leather, so they are less durable but offer a similar style at a lower price.
- Material
- Distressed faux-leather upper, footbed, and heel; rubber sole
- Category
- Apparel & Accessories > Shoes
Color
Size
Specifications
Tall boots with distressed faux-leather upper, cushioned footbed, and stacked heel.
Cushioned faux-leather footbed, textured rubber outer sole, stacked faux-leather heel.
- Material
- Distressed faux-leather upper, footbed, and heel; rubber sole
- Gender
- female
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Shoes
Additional Attributes
- Frye and Co. at Simons
- Distressed faux-leather upper
- Cushioned faux-leather footbed
- Textured rubber outer sole
- Stacked faux-leather heel
- Heel height: 2" (5 cm)
Product Insights
The Miranda 14 Tall Boots offer a budget-friendly style dupe of premium western boots, mimicking classic proportions and finish with synthetic uppers, but buyers caution it is not a genuine Frye product. Its memory foam footbed provides soft cushioning and heel hold with no break-in, yet lacks arch support and the synthetic upper is prone to peeling, making it ideal for occasional warm-weather wear despite non-breathable materials and potential restocking fees.
Verified claims
- Brand relationship
- Frye and Co. is a diffusion line inspired by Frye's Campus boot, not a genuine Frye product; it uses lower-quality materials than The Frye Company.
- Material
- Distressed faux-leather upper prone to peeling or cracking within a season.
- Comfort
- Memory foam footbed provides soft cushioning but lacks arch support.
- Heel hold
- Memory foam footbed creates a semi-custom heel hold to reduce slippage.
- Footbed
- Memory foam footbed eliminates break-in period and absorbs heel-strike shock.
- Arch support
- Footbed is cushion-focused and lacks structured arch support compared to some competitors.
- Premium finish
- Mimics premium western boot appearance with a stitched welt and stacked heel, and reads as convincingly higher-end up close despite synthetic uppers.
- Silhouette
- Smooth, unbroken shaft and classic proportions mirror traditional western boots without visible closures.
- Value
- At about $150, the Miranda 14 prioritizes style over durability and is best for occasional wear rather than daily use.
- Durability
- Synthetic upper prone to peeling; requires regular conditioning to delay damage.
- Fit
- Wide calf version available; standard fit runs loose for slimmer legs.
- Cleaning
- Spot test, then dry dust and clean with barely-damp cloth and mild soap; remove scuffs with magic eraser; air-dry stuffed to preserve shape.
- Aftercare
- Apply protective spray after cleaning; condition every 3-6 months with synthetic leather conditioner.
- Storage
- Store in breathable bags in a cool, dark closet to prevent heat and UV damage.
- Breathability
- Non-breathable synthetic upper and lining cause sweaty feet in warm weather.
- Occasional use
- Budget-friendly style dupe of premium western boots; best for occasional wear.
- Climate suitability
- Synthetic faux leather upper is not breathable; unsuitable for warm weather.
- Shaft dimensions
- The standard shaft measures 12.5 inches tall with a 14.5-inch calf circumference, giving a generous fit that suits fuller calves and layering over boot-cut jeans.
- Pressure distribution
- The memory foam footbed redistributes pressure across the heel and forefoot, helping delay foot fatigue during long periods of standing or walking.
Product record
- Title
- Miranda 14 Tall Boots
- Brand
- Frye and Co.
- Price
- 240 CAD
- Availability
- In stock
Image Analysis
3 images- 01
Product
A pair of tall tan pull-on boots are visible on a seated model; details include a rounded toe, stacked low heel, visible welt stitching, and vertical shaft seams.
- Overall shapeTall knee-height pull-on boots with a straight shaft, rounded toe box, and a slightly tapered stacked heel.
2 regions
x 0.48 · y 0.58 · w 0.38 · h 0.36 (high); x 0.34 · y 0.62 · w 0.22 · h 0.28 (high) - Material and finishSmooth matte leather-like upper with even coloration and minimal visible texture.
1 region
x 0.48 · y 0.58 · w 0.38 · h 0.36 (high) - Heel constructionLow stacked wood-tone heel with visible horizontal layers and a slightly squared outer profile.
2 regions
x 0.66 · y 0.86 · w 0.13 · h 0.07 (high); x 0.41 · y 0.86 · w 0.08 · h 0.06 (high) - Welt stitchingContrasting light-colored stitch line runs around the perimeter where the upper meets the sole (visible as a continuous welt stitch).
1 region
x 0.48 · y 0.80 · w 0.35 · h 0.03 (high) - Seam and panelingVertical panel seams run up the front of the shaft and a U-shaped vamp seam is visible at the ankle area.
1 region
x 0.54 · y 0.60 · w 0.20 · h 0.28 (high) - Closure typeNo visible laces, zippers, buckles, or straps; appears to be a slip-on pull-on style.
1 region
x 0.48 · y 0.58 · w 0.38 · h 0.36 (high)
Other
Lifestyle scene showing a seated model wearing a red dress in an indoor setting with wood paneling and a marble fireplace; warm studio lighting and carpeted floor.
- Model pose and stylingSeated female model with one arm resting on her knee and the other supporting her head; wearing a sleeveless red patterned dress that exposes the boots.
1 region
x 0.20 · y 0.05 · w 0.60 · h 0.70 (high) - Scene backgroundInterior backdrop with vertical wood paneling on the left and a black marble fireplace surround on the right.
2 regions
x 0.00 · y 0.00 · w 0.55 · h 0.45 (high); x 0.55 · y 0.00 · w 0.45 · h 0.45 (high) - Surface and propsLight beige carpeted floor visible under the model; a portion of a leather ottoman appears in the lower left corner and a metallic-legged side table is visible at left edge.
2 regions
x 0.00 · y 0.74 · w 0.40 · h 0.26 (high); x 0.00 · y 0.56 · w 0.18 · h 0.24 (high) - Lighting and shadowsWarm, diffuse studio lighting with soft shadows under and behind the model and a slight sheen on the model's skin and the leather boots.
Colors
warm tan· boot upper#BD9D72medium brown· heel/sole#7C6B5Coff-white stitch· welt stitching- Overall shapeTall knee-height pull-on boots with a straight shaft, rounded toe box, and a slightly tapered stacked heel.
- 02
Product
Rear view of a pair of tall tan leather boots with vertical seam stitching, stacked wood-look heels, stitched welt and an embossed maker mark on the outer heel of the right boot.
- Overall silhouettePair of tall, straight-shaft boots shown from the rear with rounded toplines and slightly curved inner shaft profiles where the two boots meet.
1 region
x 0.10 · y 0.04 · w 0.80 · h 0.92 (high) - Upper material and finishSmooth tan leather upper with a matte, slightly pebbled finish visible across the shaft and vamp.
1 region
x 0.12 · y 0.06 · w 0.76 · h 0.68 (high) - Vertical seam and reinforcement stitchDouble-needle vertical seam runs down the rear outer side of each shaft with a short horizontal reinforcement stitch about two thirds up the shaft.
2 regions
x 0.66 · y 0.06 · w 0.12 · h 0.78 (high); x 0.22 · y 0.06 · w 0.12 · h 0.78 (high) - Welt and outsole stitchingVisible light-colored stitched welt connecting the upper to the sole that follows the shoe perimeter above the stacked heel.
1 region
x 0.18 · y 0.76 · w 0.64 · h 0.14 (high) - Stacked heel constructionMedium-height stacked heel with horizontal wood-grain layers and a smooth finish.
2 regions
x 0.20 · y 0.78 · w 0.26 · h 0.16 (high); x 0.56 · y 0.78 · w 0.26 · h 0.16 (high) - Heel counter panel and decorative seamCurved heel counter panel with a decorative curved seam line wrapping from the inner side toward the outer heel on each boot.
2 regions
x 0.50 · y 0.60 · w 0.42 · h 0.22 (high); x 0.10 · y 0.60 · w 0.40 · h 0.22 (high) - Embossed heel mark“Embossed text on the outer heel area of the right boot reading FRYE AND CO.”
1 region
x 0.56 · y 0.66 · w 0.18 · h 0.10 (high) - Toe profile (partial)Rounded toe of the right boot visible at the lower right foreground; left boot toe is mostly out of direct view behind the right boot.
1 region
x 0.78 · y 0.82 · w 0.16 · h 0.10 (medium)
Other
Studio product shot on a plain light gray background with soft, diffuse lighting and subtle ground shadow under the heels; image cropped closely to the boots.
- Background and lightingEven light gray background with soft directional lighting that casts faint shadows beneath and slightly behind the heels.
- Shot compositionRear three-quarter composition showing both boots; right boot is slightly forward and to the right of the left boot.
- Image qualityHigh-resolution image with sharp focus on leather texture and stitching, no visible noise or compression artifacts.
Colors
tan· upper#C38C54stacked medium brown· stacked heel#8C543Coff-white· welt stitching- Overall silhouettePair of tall, straight-shaft boots shown from the rear with rounded toplines and slightly curved inner shaft profiles where the two boots meet.
- 03
Product
Right-side profile of a tall tan leather boot showing the shaft, ankle, rounded toe, stacked heel, welt stitching, seams, and an embossed maker mark on the heel counter.
- Tall shaftSingle-piece tall shaft rising from the ankle to just below the top of the image with a smooth tan leather surface and minimal shaping.
1 region
x 0.08 · y 0.03 · w 0.60 · h 0.86 (high) - Center double topstitch seamA vertical double row of topstitching runs up the front center of the shaft from the ankle area toward the top, with a short horizontal bartack near the top of the shaft.
2 regions
x 0.35 · y 0.06 · w 0.10 · h 0.55 (high); x 0.40 · y 0.12 · w 0.04 · h 0.03 (high) - Curved ankle seam and panelingCurved stitched panel that wraps from the back of the ankle to the instep area with visible topstitch lines following the curve.
1 region
x 0.12 · y 0.60 · w 0.50 · h 0.24 (high) - Rounded toeSmooth rounded toe box with uninterrupted leather surface and no visible perforations or broguing.
1 region
x 0.54 · y 0.70 · w 0.36 · h 0.25 (high) - Welt stitchingContrasting visible welt stitching runs along the seam between the upper and the sole around the forefoot and midfoot.
1 region
x 0.14 · y 0.82 · w 0.62 · h 0.06 (high) - Stacked heelRectangular stacked heel with horizontal layered wood-grain stripes and a flat base surface.
1 region
x 0.06 · y 0.78 · w 0.18 · h 0.15 (high) - Embossed heel text“FRYE AND CO”
1 region
x 0.12 · y 0.67 · w 0.12 · h 0.07 (high) - Outsole profileSlightly raised rubber outsole with a smooth beveled edge visible beneath the welt and toe area.
1 region
x 0.12 · y 0.87 · w 0.62 · h 0.07 (high)
Other
Studio product shot on a neutral light-gray background with soft shadow beneath the boot; image shows right-side profile centered in frame.
- Shot compositionRight-side profile of the boot is centered and fills most of the vertical frame with ample margin of neutral background.
- Background and shadowUniform light-gray background with a soft diffuse shadow directly beneath the sole and heel indicating even studio lighting.
- Image qualitySharp focused product details with even lighting and no visible noise or motion blur.
Colors
warm tan· upper shaft and vamp#CB955Alight beige welt· welt stitching#DBA66Bstriped medium brown· stacked heel#935A3Ddarker tan rubber· outsole edge#B47B43- Tall shaftSingle-piece tall shaft rising from the ankle to just below the top of the image with a smooth tan leather surface and minimal shaping.
Brand PDP Lookup
- Brand
- Frye and Co.
Women's Black Miranda 14 Boots | Frye & Co
Documents & Data
Reddit Insights
4 threads · r/womensfashion, r/BootsReddit generally considers the Frye and Co. Miranda 14 Tall Boots to be overpriced, low-quality knockoffs of genuine Frye boots, though a few find them cute for occasional wear.
Most comments criticize the synthetic materials, poor quality, and misleading branding, though some appreciate the style and low sale price.
Themes
Use Cases
- Budget-friendly alternative to expensive Frye boots for those who want the style
- Occasional wear in warm climates where boots are not frequently used
Watch Out For
Compared To
vs Frye Campus boots (genuine Frye)
Miranda is seen as a knockoff with lower quality synthetic materials, while the original Campus is a long-lasting leather boot.
vs The Frye Company boots (general)
Frye and Co. uses a different logo and cheaper materials; not the same quality or brand.
vs Other budget fashion boots
Considered a cheap dupe brand that may be okay for the price on sale but not for durability.
Source Threads
Explains Frye & Co. vs. The Frye Company and Miranda as a knockoff
Frye & Co is not The Frye Company. The Miranda boot is a knock off of Frye’s Campus boot which apparently retail for 4-500 now.
u/flashtigerr/womensfashionView thread →
Warns that Frye and Co. is a cheap discount version of Frye
I believe frye and co is a discount/outlet version of Frye proper and yes they are shit
u/Majsharanr/BootsView thread →
Positive experience ordering Miranda boots, noting they are different from regular Frye
Just ordered these Mirandas! Dark brown excited Happy fall y’all!
u/seaweedandrocksr/BootsView thread →
Confirms Miranda boots from DSW are different from real Frye boots
Yep, I got the Mirandas too, from DSW. It’s a different logo on the boot, so it’s definitely not the same as the more expensive Frye brand (their logo is a stylized “F”). Still cute though, even though they’re not real leather.
u/Silent-Quiet-5669r/BootsView thread →